How to install a notebook computer system

Notebook computer How to install system notebook System tutorial

Today we take windows2000/xp as an example, I installed some of the experience of the system to tell you, I hope it will help you.

Before loading the system:

1. Think about which disk you want to put the system on, and then organize the disk. The collation here, is to put the useful files in another disk to save, to prevent the format of the time mistakenly deleted. Also, if your machine hardware drive disk is not found, it is recommended to use the tool software to save the drive. This can be done by the master of Windows optimization.

2. It should be noted that the "My Documents" in the things in the C disk, do not forget to save the files inside it.

3. The paths to favorites are different depending on the system. Generally, under c:documents and settings, there is a folder named after your machine login, and when you open it you will see your favorites and copy them to another disk.

4. Do the above, basically can start to install the system. Restart your computer, and then press DEL to enter the BIOS setup. Some people here do not know when to press the DEL key, then tell you a stupid way, as long as the restart, has been pressed. There is also, because the motherboard manufacturer's different, enter the BIOS shortcut key also has the difference. Some F2, some F10, the general boot on the low end of the screen are prompted.

5. Do not change after entering the BIOS, because it is very important things, if the error may not even go into the system. We just need to change the order of the letter in the computer startup.

6. How besides this is really hard to say, because the BIOS settings will vary depending on the motherboard. Generally under the Boot tab, set up the light drive to start the computer. BIOS settings, the right will be related to the prompts, the rookie can be based on the prompts to do. Do not focus on the start, to put the installation disk into the optical drive, and then press F10 to save and restart.

7. Pay attention to the observation at this time, the computer will first detect the CD-ROM drive, the screen below a line of characters (specific English forgotten, Khan), meaning that you press any key to enter the CD-ROM boot. Click, hear the CD-ROM drive started crazy turn, the process of loading the system officially began!

Install the system:

1. Look at the tips in the screen, because they are Chinese so there is little need to introduce anything. First you need to choose whether to install a new operating system or repair, choose to install a new operating system, and then press F8 to agree to those protocols, the letter selection interface appears.

2. Use the keyboard up and down keys to move the cursor to the letter you want to install, press the "D" button, the system will be prompted to delete the disk will delete all data, regardless of it, and then press "L" key to confirm the deletion. When finished, the screen returns to the interface just now. Then select "Install Windows XP on the current Disk" (presumably, the original is not in mind) and press ENTER, the system prompts you to format the disk. Select the "Fast NTFS" format, the format of the interface, waiting for the progress bar to 100% when the computer began to automatically mount the installation files in the CD drive, about 8 minutes (depending on the speed of the CD drive), complete the system automatically restart.

3. Note that the installation disk in the CD drive is removed to avoid restarting and automatically reading.

4. After reboot to enter the installation interface again, the installation disk will be put into the installation continue, almost do not need you to do any settings, point "next" can be. But in the middle there is a process of input serial number to move.

5. This process is about 40 minutes, during which the screen will display some information about Windows XP related functions, you can pay attention to. When you are finished, you are prompted to remove the installation disk. You take it out, reboot, and in the way the BIOS will boot to boot sequence back to the hard drive, basically complete the installation process!

After installing the system:

Generally after entering the system, the driver of the common hardware has been installed, but not all. This will require the user to install it themselves. First look at the machine which drive is not installed! Right click on "My Computer", choose "Properties", click "Device Manager" in "Hardware" tab, all of which have a question mark icon in front of the device indicates that the device has a problem. Double-click and press the prompts above to install the driver. Until the previous "question mark" disappears. Drivers that need to be installed generally have graphics cards, sound cards, network cards, cats, some of the more advanced machines and infrared, Bluetooth and other adapter driver.

The following are some of the optimization of the system settings, if your machine configuration is not high, suggest to do as I say.

1. Right-click the screen and select Properties. Click on the "Appearance" tab, select "Windows Classic style" in the "Appearance and button" Drop-down menu, and then in the "Settings" tab, adjust the screen resolution capitalization, generally 1024*768. If you are using a normal CRT monitor, you need to click the "Monitor" tab, adjust the "screen refresh rate" to "85 Hz", click OK! Does the screen look much more comfortable?

2. Right-click the taskbar, select Properties, and in the Taskbar tab, select the check box before show Quick Launch. Then click the "Start Menu" tab, change the menu class to "Classic" Start "Menu", click "OK", look at the present appearance is not to be comfortable point? (Hey, my personal feeling!)

3. Right-click My Computer and select the "Advanced" tab. Click the Settings button in the Performance key. Click "Adjust for Best Performance" in the visual effects item, and then select "Use Common tasks in folders" in the following options. Do this, and then click the Advanced tab next to Visual effects and click the Set button in virtual memory. In the Open property box, first position the cursor in C disk, click the following "No paging file", and then click D (which disk space on your machine on the point of which), in the custom size to enter the corresponding value, the point next to the "Settings" button, and then click OK. The setting of virtual memory depends on the capacity of the memory itself! The general situation is 1.5 times times the capacity of the memory itself!

4. Right-click My Computer, select the System Restore tab, and select "Turn off System Restore on all drives" If you don't need one!

5. At this point you will find the screen in the lower right corner of the system tray has a "shield" icon, which is the Security Center of Windows XP. Double-click to open it, and when you do not install your own anti-virus software, the "firewall" and "virus protection" are turned on. This will be relatively high security!

6. After doing this click "Start", select "Windows Update", at this time automatically open IE to connect to the Windows upgrade site, follow the prompts above it to upgrade, the steps are essential! You may need to restart your computer after the upgrade is complete.

7. Open any folder, click "Tools" from the menu bar, and select "Folder Options". Click the View tab to remove the check before the three categories, "do not cache thumbnails", "Remember the view location for each folder," and "display a message when you point to a folder or desktop item." Click on "Apply to all Folders" above, point OK!

8> Right click IE, select "Properties", in the "General" tab, click "Use blank Page", and then point to determine!

Here, our novice installation system on the basic finished, but I would like to remind you a few points:

1. Antivirus software must be installed, and often updated, regular anti-virus, do not think that the site will not be poisoned.

2. The system must be patched, Microsoft released a patch the second week of the month, will certainly follow the way I mentioned above to update.

3. Do not download and install software indiscriminately. Many irregular websites offer download links that may be virus-free or bundled with a bunch of junk software. Please be sure to look at the options when downloading, to remove unwanted software before the check.