How to install a system using a USB stick

Now using a USB flash drive for their own personal computer is very convenient, first to prepare the following tools, a capacity of not less than 2G USB flash drive, as well as the system image you want to install, of course, it is recommended that the bigger the better, so we can easily put the system image in the U disk (large u disk can be placed in multiple mirrors, Easy to choose different systems for the machine, so that we can install the system.

The first step, make the boot disk, we can download the old peaches, as well as Master U, to make the boot disk. The corresponding software can be downloaded Baidu, as shown in the figure below.

The second step, the choice of system image, this need according to the computer hardware configuration to choose the right system, if the machine is older recommended XP system, although Microsoft has now said that the XP system is no longer available updates, but he has been the user acclaim, a huge success of an operating system.

If the computer hardware configuration is good, it is recommended to use the Win7 or win8.1 operating system, of course, which also distinguishes between 32-bit and 64-bit operating systems. Theoretically 64 bits run relatively faster, but for the average user, there's really not much difference. My recommendation is that memory 2G is recommended to install a 32-bit operating system, memory 4G and the above recommended 64-bit operating system installation.

The third step, if your computer is brand PC common brand laptop into BIOS method:

1, IBM (cold boot Press F1, some new number can be F1 at reboot)

2. HP (press F2 when starting and restarting)

3. SONY (press F2 when starting and restarting)

4. Dell (press F2 when starting and restarting)

5. Acer (press F2 when starting and restarting)

6. Toshiba (Press ESC and press F1 during cold boot)

7, Compaq (Power on to the upper right corner of the flashing cursor when pressing F10, or power-on F10)

8. Fujitsu (press F2 when starting and restarting)

9. Most domestic and Taiwanese brands (press F2 when starting and restarting)

If the computer is assembled according to the model of the motherboard brand, then Baidu, check the way into the BIOS.

I'll use the Dell computer as an example to set up the startup item.

1, the first is to restart the computer, in the computer before entering the system will have a picture, the screen background is black in the lower left corner of the location has the prompt to show which key to enter the BIOS settings, BIOS settings can set the computer's first boot.

2, restart the computer, the moment of the logo appears, press F2 to enter the Bois for startup item settings, or press and hold F12 to select the startup item, you can also enter the USB stick to start.

3, in the BIOS setup to find the first boot option, the use of the arrow to adjust the primary boot, the option is selected and then enter the boot entry in some BIOS system, you can set the initial start item directly.

4, in the first startup item settings find the option you want to set as the first boot entry, let it be selected and then press F10, select the Y key in the popup dialog box, and save the exit.

Fourth step, install the system (Note: If you do not replace the system, it is recommended to use the corresponding driver software before the installation of computer driver, can save a lot of time)

After setting the USB flash drive as the first boot, it will enter the interface as shown below, as we are ready to install the WIN8 Pro version, so it is recommended to select "01" Run U Master win8pe Lite (for new machine), then enter:

Load Win8pe, U master in start Win8pe, need to load to virtual disk, new computer load general relatively fast, about 40 seconds, old-fashioned computer or all-in-one machine about 2 minutes or so, after the completion of loading, automatically enter into the WIN8PE system interface (do not wait, and then randomly press the computer keyboard, This is easy to fail):

2. After entering the WIN8PE, the desktop icon will jump three times, U Master Rapid installation will automatically pop up, if there is no automatic pop-up, readers can click on the run Desktop "U master one click Quick Install", the steps can be as shown in the following steps step by step walk:

3. After clicking the start will pop up the screen shown below, we only need to select the default on the line, the installation will be formatted C drive, so be sure to confirm the good, C disk has no important information, and then click OK:

4. Now that the interface is being formatted, just be patient and wait:

5. This is the scroll bar, remind readers here, do not move the U disk and computer, otherwise prone to unexpected problems, after testing, the general installation of the original WIN8 Professional version of the scroll bar about 5 minutes, the old machine time relatively long when the progress bar read, You will be prompted to restore success.

6, the display restore completed successfully, your computer will be restarted in 10 seconds, here need to unplug the USB flash drive, and then click Restart Now:

After the computer restarts, waiting for the new system to automatically complete the configuration, because the first time to enter the system, the process needs to configure some system files, the process takes some time, patience to complete. When finished, the system is installed successfully.