The first step: Connect the line, WAN Port network (that is, ADSL or other broadband), LAN mouth network that is your computer card, each router has a default IP address, read the instructions to know, my 192.168.1.1, the IP of their own computer configured to 192.168.1.x, The gateway and DNS point to the router, which is 192.168.1.1, open Internet Explorer on the computer, enter HTTP://192.168.1.1/, and enter the 192.168.1.1 router Setup interface.
Enter Wireless Router address
Step two: The following 192.168.1.1 Landing page appears, the default account number and password are admin.
Enter account password
The third step: running status, showing our router's current internal and external network information
Step Fourth: Set the basic parameters for the wizard to set the route.
Set Wizard Parameters
Fifth step: Wan Port Connection type refers to the router supports three kinds of commonly used Internet methods, please choose according to your own situation. If your Internet access is dynamic IP, that is, you can automatically from the Network service provider (such as: China Telecom) to obtain IP address, select "Dynamic IP"; If your Internet access is static IP, that is, you have a network service provider (such as: China Telecom) to provide a fixed IP address, please select "Static IP"; If you are on the Internet in the way of ADSL virtual dialing, please select "PPPoE".
Choose the way to surf the internet
Sixth step: Then the next step into the wireless settings, we can see the channel, Mode, security options, SSID and so on, the general SSID is a name, you can fill in, and then the pattern is mostly 11bgn. Wireless security options We have to choose WPA-PSK/WPA2-PSK, so safe, Lest you let others crack and rub the net.
Seventh Step: Setup Wizard, the wizard completes the restart of the wireless router can be used.