How to install USB flash drives on Windows 7

If you ask which operating system has the most users and the highest satisfaction, I believe most people will choose the Windows operating system. Indeed, the Windows operating system has basically taken control of most of the market, for example, Apple's operating system can only be a small part of the people's choice. The reason why Windows is accepted is not only because of its powerful functions, but also because it first enters the market and meets the needs of users, everyone is familiar with him! Other operating systems are generally used for service purposes. They are not suitable for common users and will not be used! So speaking of the user's operating system, we naturally think of windows.

Another point is that it is constantly upgrading to meet people's needs.
XP can be said to be its most successful system, so that the Vista system, which should have been its successor, will eventually be stunned. It is undeniable that Vista is a good operating system, however, it is not a successful operating system, and its many defects (compatibility problems, high system resource occupation, UAC too cumbersome, etc.) and XP maturity make it eventually abandoned by people. However, Microsoft has not stopped the upgrade of the operating system. Now Windows 7 is better than XP and more mature than Vista.

With the launch of Windows 7, people have gradually learned about it. Now it has richer new features and a new personalized and user-friendly experience, so many computer enthusiasts are eager to try, experience and share. However, sharing the new system with a CD all day is a very troublesome task and is very vulnerable to damage. Fortunately, a USB flash disk is already in use, A good tool for installing a system on a memory card or mobile hard disk. However, many people may not have tried this simple and practical tool, so today I will explain how to make the mobile storage products such as USB flash drives, flash cards, and mobile hard disks as system disks.

Using a mobile storage tool (U disk, memory card, mobile hard disk) to install the system is actually very simple, the method is only two parts: 1. Make these storage products into a system installation disk
2. Use them to install the system. First, of course, we will first introduce how to turn these products into a Windows 7 installation disk.

Tools to be prepared: 1. USB flash drives, flash cards, and mobile hard disks

2. Software: uiso9, win7 System ISO file.

Because win7
The ISO file sizes are different. The minimum 32-bit single edition also requires a capacity of 2 to 42 GB. Therefore, when preparing mobile storage products, the initial capacity should be 4 GB, the other type includes a 32-bit and 64-bit capacity of about 4 GB, because although the capacity of products such as USB flash drives is 4 GB, only about GB is left after the grid is finished, therefore, your mobile storage product has a capacity of 8 GB. Otherwise, you can install a multi-version Startup File.

In terms of software tools, this ultraiso is a powerful, convenient, and practical software disc file production, editing, and conversion tool, it can directly edit the disk files and Extract files from the disk, you can also directly make the disk from the CD-ROM or the files on the hard disk to make ISO files. At the same time, you can also process the startup information of the ISO file to create a bootable disc. With ultraiso, you can create/edit a CD file as you like and use the CD recording software to burn out your desired CD.

Now we will officially introduce the process of creating a system disk. In fact, the method is as simple as you don't believe it. You just need a single process.

First, we will take a USB flash drive as an example. After inserting a USB flash drive into the computer, double-click the ultraiso software disk and the followingProgramBox, click File-open to find the location of your ISO file. Double-click the file to introduce the ISO file to this program.

It is the interface effect after introducing the ISO file of Windows 7 system into the program. The upper half is the ISO file, and the lower half is the hard disk on which you choose to introduce the file, in this case, you need to click your USB flash drive.

When everything is ready, click Start on the top to start writing files to your USB flash drive. Before that, the program will prompt you "after writing files, all the original files will disappear and whether to continue ". This is also a clear point for everyone. If these mobile storage products are used as system disks, the previous files will disappear, if important files in your USB flash drive must be transferred out first.

After everything is done, it is a wait time, and then a new system is installed with a disk. Is it very easy, of course, the flash card and mobile hard drive are created in the same way as the USB flash drive. In addition, although all the previous files will be deleted during installation, however, you do not need to worry about the remaining space of your mobile storage product after writing.

After completing the system installation disk, the following is the installation. First, you must make a small change to the BIOS. Generally, the BIOS is set to hard disk boot or Optical Drive boot. We need to change it to USB boot.

BiOS settings for Mobile storage first boot:

Next, we will take the mobile hard drive as the boot device as an example to explain: After the computer is turned on, press the Del key to enter the Award BIOS setup program, you will see the following interface:

Select the second line of advanced BIOS
Features (Advanced BIOS settings), press enter to enter the following interface:

First, make sure that the second line (the motherboard is different and the location is different) first boot
The device is set to boot from the hard disk first. Then in the first line of Hard Disk boot
Press enter after priority. Here, you can set which disk is the first device to boot when you have multiple hard disks. It must be clarified here with first boot
Device differences.

After hitting the carriage return, we will see the USB-HDD0 in the list, as shown in figure: Lenovo USB hard drive
2.0 is the mobile hard disk we connect to the computer. Therefore, we need to set its position to the first one, that is, boot from the mobile hard disk first, instead of wdxxxx and stxxxx.

The setting method is simple. Use the page down/page on the keyboard.
Up, you can also use the plus (+)/minus (-) number to move the disk. In short, you can set the hard drive to the end, as shown in. After the settings are correct, press F10 to save and exit and restart the computer, next, the system will first boot from the mobile hard disk (when your mobile hard disk is ready to boot ).

In the previous page, we learned how to set up a mobile storage device as the first boot device. However, in the opinion of many experts, this method is outdated because it is faster and easier to set. Let's take a look!

Some cainiao may have seen that when they set the first boot device, they did not enter the BIOS at all, but randomly pressed some keys on the keyboard, and then came out with the boot device menu. So, are these experts really messing up the buttons? Of course, the answer is no.

In fact, in recent years, motherboard manufacturers have added a very user-friendly feature in the process of setting the first boot device, that is, you can use some specific function keys to directly set the first boot device. These function keys are not necessarily for major motherboard manufacturers, but are basically the following four keys-ESC, F8, F9, and F11. How can these experts find these secrets? See the following three figures.

The above is the screen display of the three different brands and different types of mainboards during the post period. Please refer to the section in the yellow box for me, the prompted key must be related to boot. Yes, the key that appears on the screen is used to temporarily change the boot device. Basically, all vendors define one of these keys. Therefore, when starting a computer, some experts directly press these keys at the same time, so this is the scene at the beginning of this page.

Generally, after you press one of the preceding keys
The page shown after post appears, where you can directly use the up and down keys to select the device as the first boot device. In addition, this advantage is not only convenient, but also temporary. It will not change the BIOS settings, that is, it will only expire after the device is booted and restarted, very convenient.

After everything is done, it is a normal installation program. I believe you can do it. After reading how to create a Windows 7 system installation disk with the Mobile storage product, do you want to try it yourself.

Installation Process

Installation Complete

The figure above shows that the latest Windows 7 system has been successfully loaded into the computer interface. If you haven't installed it, would you like to enjoy the pleasure of the latest operating system, the system installed by the optical drive is outdated, and it is easy to wear and tear around with the CD. Compared with mobile storage products, the system is faster and more portable, and products such as the TF card can be placed on mobile phones at any time, for users, there is no need to increase the burden.

In addition, before installing Windows 7, you need to know whether your computer is suitable for Windows 7. If your old man is too old, I suggest you give up on it. Below is the minimum configuration for Windows 7:

Recommended Configuration:

Well, I have already introduced you to those who need to know about it. I hope that my introduction today will be helpful to you and you don't have to worry about installing the system.