How to install LuCI after refreshing the OpenWRT Standard Edition firmware

Install LuCI with the OpenWRT Standard Edition firmware. 1. connect the LAN port of the computer and the LAN port of the router to the OpenWRT router using a network cable. then, perform the following operations: 1. open PuTTY and click the Session item in the tree list. 2. in the HostName (orIPaddress) text box, enter 1... install LuCI with the OpenWRT Standard Edition firmware. 1. connect the LAN port of the computer and the LAN port of the router to the OpenWRT router using a network cable. then, perform the following operations: 1. open PuTTY and click the "Session" item in the tree list. 2. enter "192.168.1.1" in the Host Name (or IP address) text box and "22" in the Port text box; 3. select "Telnet" in Connection type, and press the Open button to enter the Linux Terminal of the router. the OpenWRT welcome interface and root @ OpenWRT: ~ are displayed :~ # Prompt; note: you can use the Windows command for Telnet. 2. modify the Root password. on the Linux Terminal, enter "passwd root" and prompt the message "Changing password for root New passoword:"; 2. enter the password of the root user. no character or mask is displayed during the input process. after the input is complete, press enter to display the prompt "Retype password:". 3. enter the Password of the root user again. The character or mask is not displayed during the input process. after the input is complete, press enter. the prompt "Password for root changed by root" appears, indicating that the Password of the root user is successfully changed, to ensure security, OpenWRT will disable the Telnet service of the router. later, you can only log on to the Linux Terminal of the router through the ssh protocol and the root user password. 3. modify the network configuration to connect to the Internet and use a network cable to connect the WAN port of the router to the Ethernet interface of the cat; 1. use WinSCP to log on to the vro; 2. go to the/etc/config Directory of the vro and double-click the network File. 3. modify the "config interface 'wan" project as follows: config interface 'wan 'option ifname' eth1' option _ orig_ifname 'eth1' option _ orig_bridge 'false' option proto 'pppoe 'option username' your bandwidth account 'option password' account password '4. press Ctrl + S to save the file, or click the Save icon to display the prompt window again. press "no" to display the upload prompt. open the network File again and make sure the modification is successful. 6. press Ctrl + P to open PuTTY and log on to the Linux Terminal of the router. 7. Enter "/etc/init. d/network restart. wait for a while. if several lines of status information such as "'radio0' is disabled" are displayed, the restart is complete. 8. enter "ping 8.8.8.8" at the prompt. if the Ping succeeds, the Internet is successfully connected. press Ctrl + C to stop the Ping operation. 4. install the Web Management Interface (LuCY); 1. on the Linux Terminal of the router displayed in PuTTY, enter "opkg updateprohibited, start and download packages.gz, and update; 2. enter "opkg install luci_trunk + svn9663-1_ar71xx.ipk", install the LuCY subject, first start to automatically download various associated libraries, the download will automatically install the configuration, and finally display "refreshing luci. "; 3. enter opkg install luci-i18n-chinese_trunk + svn9663-1_ar71xx.ipk to install LuCY Jane Body of the Chinese language; finally displays the "processing ing luci-i18n-chinese. "; 4. enter "opkg install luci-theme-bootstrap_trunk + svn9663-1_ar71xx.ipk", install LuCY theme, and finally display "refreshing luci-theme-bootstrap. "; 5. enter "/etc/init. d/uhttpd enable "press enter to open the uhttpd service; 6. enter "/etc/init. d/uhttpd start "press enter to enable uhttpd to start automatically; 7. enter "192.168.1.1" in the computer browser. if you can access the vro, LuCY is successfully installed. 8. go to the System option page of The LuCY interface; 9. click the Language and Style option page. 10. in the Language dialog box, select "chinese" and change the Language to chinese. 11. in the Design drop-down box, select "Bootst Rap, change the topic to Bootstrap; 12. press Save & Apply to Save and Apply; 13. press the Logout option to exit. The Chinese Bootstrap logon interface is displayed. 5. for other key points, you can download the three ipk packages in step 4, step 3, and step 4, and use WinSCP to put them in the/tmp Directory of the vro, run the "cd/tmp" command to go to the/tmp directory and run the command to avoid connection errors. Offline batch ipk installation method 1. download *. ipk plug-in package; 2. use WinSCP to upload. ipk, B. ipk, c. ipk to/tmp; 3. run the following command with PuTTY: opkg updatmcm/tmpopkg install a B c to modify the ipk package software source/etc/opkg. the conf file records the software source. the address after src/gz Packages is the software source, opk. the conf file code is as follows: # src/gz packages http://downloads.openwrt.org/snapshots/ Development Code/version/chip/packages/src/gz Packages ftp://a:a@192.168.1.100dest Root/dest ram/tmplists_dir ext/var/opkg-listsoption overlay_root/overlaydest plugin_root/plugin_root view installed ipk: opkg list-installed delete installed ipk: opkg remove xxxx. ipk display File: cat etc/config/network Editing File: vim etc/config/network