How to install Meilan 2 SIM card

In terms of appearance, Meilan 2 basically continues the design process of its predecessors. It still adopts the integrated body design. The card slot is located on the left side of the body. You need to use the card needle in the box to take out the card slot, to install the nano-SIM card. Therefore, the first step for Meilan 2 to install Nano-SIM card is to use a card needle to remove the card slot, as shown in the following figure:

Meilan 2 adopts a single card slot and dual card design. The dual card 1 is located on the outer side, and the dual card 2 is located in the card slot for internal testing. The following describes the installation methods of the single card, dual card, and SIM + TF card respectively.

Note:1. SIM1/2 supports 4G networks. You can switch the data service mode of SIM1/2 on the configuration page. At this time, the other card slot only supports GSM.

2. SIM1 is compatible with Nano-SIM and microSD cards and can be placed as needed.

Meilan 2 dual SIM card installation steps:

1. Put SIM2 into the cart first

2. Then push the cart into the cart 1/2, and then put SIM1 into the cart

3. Complete the push to complete SIM card installation.

Steps for installing a single SIM card:

SIM + TF card installation steps:

1. Put SIM2 into the cart first

2. Then push the cart into the cart 1/2, and then put the TF into the cart

3. Complete the installation.