How to install the Tp-link wr885n wireless router

installation method of Tp-link wr885n wireless router

Step one, tl-wr885n router installation

1, telephone Line: Please prepare 2 short network cable, a network cable used to connect ADSL Modem (cat) and tl-wr885n, Router WAN interface; Another network cable is used to connect any LAN (1/2/3/4) interface and computer on the tl-wr885n router.

2, Optical brazing: Please prepare 2 network cable, a network cable used to connect the light cat and tl-wr885n Router WAN interface; Another network cable is used to connect any LAN (1/2/3/4) interface and computer on the tl-wr885n router.

3, network cable households: Please prepare 1 network cable, first the broadband operator provided by the household network cable inserted in the WAN interface of the tl-wr885n router, and then the network of their own to connect the computer, the other end connected to the TL-WR885N router on any one LAN (1/2/3/4) interface.

Step two: Set the computer IP address

This example takes a Windows XP system demo, and Windows 7 and Windows 8 users read the article: Computer dynamic IP Address setting method.

1, right click on "Network Neighborhood"--> Click "Properties"

2, the mouse right click "Local Connection"-> Click "Properties"

3, the mouse double click Internet Protocol (TCP/IP)

4, select "Automatically obtain IP address" and "Automatically obtain DNS server address"--> click "OK".

PS: If the computer is a static IP address before the Internet, please record the computer IP, gateway, subnet mask, DNS information, and then set to automatically obtain, the following figure.

Step three, tl-wr885n router Internet settings

1, Login Settings interface: Run the Computer browser, in the browser's address bar input tplogin.cn and then press ENTER, will pop up a dialog box. tplogin.cn not open? Click to read: tplogin.cn not open solution

2, set the login password: The first time to log on to the TL-WR882N router, users need to manually set a login password; set the admin password--> in the "Set Password" box and enter--> Click OK again in "Confirm password".

Note: If you have set up your admin password, a dialog box with a password will pop up directly, as shown in the following figure. Users only need to enter a previously set password to log in.

3, Run the Setup Wizard: Enter the password to login, the router will automatically eject the Settings Wizard interface, if not pop-up, you can click on the left menu of the "Setup Wizard" to run.

4, choose the way of surfing the Internet: Here you can see a total of 4 options, namely: "Let the router automatically choose the Internet Mode", "PPPoE (ADSL virtual dial-up)", "Dynamic IP (Ethernet broadband, automatically from the service provider to obtain IP address)", "Static IP (Ethernet broadband, Network service provider to provide fixed IP address) ". How to choose the way to surf the Internet? The following is a detailed description.

(1), ADSL dial: At present, more than 90% of the broadband users are "ADSL dial-up" Internet access, for "ADSL dial-up" broadband services, broadband operators to provide a broadband user name, broadband password to the user; When you are not using a router, you need to dial the Internet through a "broadband connection" on your computer. ADSL dial-up Internet settings: Select "PPPoE (ADSL virtual dial)"--> click "Next"

tl-wr885n Router Select PPPoE dial-up Internet access, input broadband operators to provide broadband account and password--> click "Next".

(2), dynamic IP: That is, dynamic IP (DHCP access IP), for the "Dynamic IP" internet broadband business users, broadband operators to provide a network cable to the user's home; When not using a router, simply plug the network cable into the computer and set the computer's IP address to be automatically obtained, The computer will be able to surf the Internet. Dynamic IP Settings: Select "Dynamic IP (Ethernet broadband, automatically obtain IP address from the service provider)"--> Click "Next"

(3), static IP: handled the "Static IP" internet broadband business users, broadband operators to provide a network cable to the user's home, but also provides an IP address, subnet mask, gateway, 2 DNS server address to the user, when not using the router, you need to plug this network cable on the computer, and set the IP address on the computer according to the IP address information provided.

Static IP Internet settings: Select "Static IP (Ethernet broadband, network service provider to provide fixed IP address)"--> click "Next".

Fill in the operator's assigned IP address, subnet mask, gateway, and DNS server address--> click Next.

6, configure the wireless network: "SSID" that is, the wireless network name, users according to their own needs to set--> tick "WPA-PSK/WPA2-PSK"--> set "PSK password"--> click "Next".

7, complete the setup: Click "Finish"

8, restart completed, login to the Tp-link tl-wr882n wireless router settings interface, click "Run state"--> View "WAN status", if the display has been obtained IP address information, such as the following figure shows that the setting is successful, can be normal Internet.

Note the problem:

(1), the Internet mode do not choose "Let the router automatically choose the Internet Way", routers often identify inaccurate, resulting in the Internet.

(2), "PPPoE (ADSL virtual dial-up)", "Dynamic IP", "Static IP" three kinds of Internet access, based on your broadband business type to choose, not correct, is not able to access the Internet; If according to the above introduction, you still can not judge your own way of surfing the internet, Please call your broadband operator for more information and make sure you have a choice.

(3), because the software (firmware) version of the router is different, the settings and this article may be slightly different, but not too big.