How to install WinPE iOS to the hard drive? tutorial on installing WinPE to hard disk

WinPE is a small operating system, mainly used for installation or maintenance of the system, many people have PE installed to the U disk, actually installed to the hard disk more practical, I have been doing so, because the rogue software is too much, an inattentive to cause trouble, delete are deleted, the best way is, Boot into the WinPE for deletion, as shown below, I often use this trick.

This WinPE can be downloaded separately from the Internet, for installation, in fact, in many ghost version of the image file is not the software, this article on how to install the ghost version of the image file WinPE to the hard drive steps.

　　To install the WinPE to the hard disk in the system image:

1, of course, the first step is to download the system image files from the Internet, this image file can not only be used to install the operating system, but also to extract the tools to use, WinPE is one of the tools, the first image file decompression.

2, into the decompression folder, find "AUTORUN." EXE file, that is, automatically run the file, double-click Start.

3, will open the system image of the installation interface, we do not install the system, only to install WinPE to the hard disk, so select the "install WinPE to System disk" this item, because the system version is different, option location and name will have a certain difference, if it is ghost version of the system, Most will have WinPE to install this item.

4, open the WinPE installation window, there will be Chinese prompts, here is the hint, press 1 and return, is to install WinPE to the system disk, press Q and then enter, is to cancel the installation and exit.

5, since this article describes how to install WinPE to the hard drive, of course, press 1, and then enter the execution.

6, then enter the system boot menu wait time for 0-30 seconds, if 0, the boot menu is not displayed.

Tip: Do not set to 0, otherwise you will not be able to select a startup item.

7, my choice is, generally set the time to 3 seconds, enter 3 after, press ENTER.

8, and then the setup is to install the external program (that is, WinPE) to which disk, of course, it is best to install to the system disk.

9, the system disk is generally C disk, at this time, you can enter C:, and then press ENTER to perform, a hint, in the C after to enter the English state of the colon, C is not case-sensitive.

10, then is the installation process, the time is very short, a few seconds or more than 10 seconds, after the installation is completed, if you want to enter the WinPE, after the boot, enter the system selection, press up and down direction key, select WinPE this item, press ENTER, enter WinPE.

　　Note:

1, this operation should be very careful, especially when choosing the installation disk, we must carefully see and then press ENTER, otherwise there will be problems.

2, if some people are slow or unfamiliar, you can set the system to wait for a long time, can be set to 10 seconds or 30 seconds can be.

3, can also be installed from the ghost version of the system CD WinPE to the hard drive, but very troublesome, because to set the BIOS to boot from the CD, so this is not the way to talk about this.