What to do if the IPHONE4/4S/5/5S/5/6 slide answering fails
First, we need to know why our iphone will fail. The reason is actually very simple.
The root cause of this problem is the mobile phone pocket, and the trouser pocket generated static electricity, and capacitive screen has a feature is too much surface electrostatic is prone to not respond to action, so this problem in the old fashioned use of resistive screen smart phone is not easy to appear.
reason: static electricity (regardless of temperature), as long as the capacitance screen will have this problem.
Wipe the screen with the entire palm one way 2-3 times (preferably with the Palm peak, that is, the little finger to the wrist part, because the meat is the most flat, and the screen can fully contact.) )。
However, the above measures are palliative and not the root causes, to solve this problem has the following measures:
1, mobile phone do not put trouser pockets, put a jacket pocket or use mobile phone sets
2. If you want to put your trouser pocket, then do not screen inward, because the screen is prone to friction and create static electricity
Q: Why not normally, only when the caller is called?
A
: did you find out that the problem is not when you are playing the phone, but the phone is in the pocket when someone calls, and then found that can not slide, this is because the mobile phone in the pockets and trousers friction generated by static electricity so that the screen temporarily failed, as long as the elimination of static electricity can return to normal.
Q: Why do you usually put it in your pocket when you don't have a phone call to play?
A
:1, have you noticed at this time and at that time (when the caller) the biggest point is not at the same time what? Right, is the button, call when the screen automatically lit, do not need us to button, we take out to play when it is necessary to click the physical button to unlock, the difference is here, When we press the button because of the formation of the circuit to eliminate static, so there will be no failure of the phenomenon.
2, radio or magnetic field will also cause static electricity, when the phone call, the signal received by the change, it may also produce static electricity, so sometimes the phone in the bag may also appear this problem. Of course, if you are playing mobile phone at this time, even if there is static electricity, it will be eliminated immediately.
Q: Why sometimes you can slide, but only half.
Answer: or electrostatic reason, very simple, this is because we only have a part of the screen with static electricity.
Q: Why is the screen facing the thigh more prone to problems when placed in a trouser pocket, while the screen is less likely to occur?
A : This problem is too simple, when the effective friction to the thigh compared to the outside when the effective friction rate is too much.
What about the iphone screen malfunction?
The mobile phone is broken, or the touch part is not normal, for example, the mobile phone backstage can not close, the red part cannot press, the dialing also is not normal.
Step one: Dismantle the machine to begin, need to take out the Cato first, otherwise disassemble the motherboard easy trip.
Step two: The bottom screws out, the back cover to the top slide, open the back cover, remove the motherboard parts of the screws, this time the screw memory board very easy to use.
Step three: When the screen is used to blow the hair dryer, the red part, there is glue.
Step four: Found, is the screen line, touch line has a small part of the bad mouth.
Step five: Finally, assemble back, change screen end, workpiece success! Test camera, bottom speaker, microphone, handset, dial is normal, test normal!
Before dismantling the machine, the card must be removed first, or the motherboard will be broken.
Change the screen to be ready for the hair dryer, the top and tail of the screen to be blown hot, otherwise it will rip off, the screen is very fragile.
Dismantle the machine need to use skillful force, the strength grasps good, otherwise it is easy to demolish the bad, the line position all must pay attention, do not break.
