How to monitor Windows system resources under LoadRunner

Generally in the client through the LoadRunner to the server for the pressure test, all need real-time monitoring of server-side system resources, this article is a brief introduction to how to set up in the LoadRunner controller configuration monitoring Windows Resource, In fact, you can also directly on the remote connection server on the above open Task Manager or in the control Panel to find performance counters to monitor also can, but in order to pressure in the LR process more convenient, we still have to learn this basic configuration. The configuration here requires different settings for different server operating systems, but the basic idea is the same. This article takes the Windows system as an example, the specific configuration is as follows:

1, through the client and server network testing to ensure smooth communication

2, open server-side windows in the following two services, the following figure:

3, need to change the server's system local policy, this is very important, but also determines whether the client can access the server side of the key steps, the specific need to enter the control Panel under the management tools, find local Security policy, as follows:

Note: This must be changed to Classic mode, the default is guest only mode.

4, test in the client, in the "Run" column to enter the IP address of the server, followed by C $, indicating the server under the system under the directory of resources, such as: "//192.168.96.135/c$" to see if the Server C disk directory, usually may need to enter a username and password, Populating the server-side account and password is OK, as follows:

Note: If the display can access the page, the server-side system resources can be accessed normally and can be monitored.

5. Switch to LoadRunner's controller to configure monitoring targets under Windows resources, as follows:

The figure above shows that this configuration is basically similar to the performance counter configuration of the system.

6, see the configuration completed real-time monitoring records, as shown in the following figure:

These are the system resources of the target servers that are monitored in real time during the stress testing process.

LR is a full-featured performance testing tool, so many details of the function may not be set, but the role is very large. The next opportunity to summarize loadrunner how to monitor Linux system resources.