How to optimize SSD solid-state drive in Win8 system

How to optimize SSD solid-state drive in Win8 system

One, AHCI hard disk mode can improve hard disk performance, determine your solid state drive is running in AHCI mode, specific can be installed in the motherboard BIOS in front of the system set up!

Second, turn on the TRIM function to reduce disk wipe operation, extend the flash life of solid state hard disk, Windows 8 by default, the trim instruction is open, if you want to query the current status of the trim instructions, we can under the Administrator rights, access to the command prompt interface, input "fsutil Behavior Query Disabledeletenotify, and then you get feedback about the status of queries. In this case, the hint is "disabledeletenotify = 0", i.e. the trim instruction is enabled; the hint is "disabledeletenotify = 1" That is, the trim instruction is not enabled and the trim is not turned on, please update the drive and system patch in time.

Third, turn off System Restore function, this function will affect the normal operation of SSD or trim, and then affect the ability of the SSD's reading and writing.

Turn off the disk index, the solid state drive response time is very low do not need this function, as far as possible to reduce unnecessary read and write operations beneficial solid-state drives.

Shut down the disk consolidation plan, which will increase disk read and write operations, the solid-state drive will not produce disk fragmentation, this feature will only increase the number of reads and writes.

Six, turn off disk paging, do not recommend memory less than 4G students turn off this support, but turning off disk paging saves 3-5g disk space.

Turn off Windows Write cache buffer Flush (or leave the default).

Eight, turn off prefetch (prefetch) and SuperFetch (super prefetch) in terms of 0.1ms-level delay does not require this technology. So the performance will improve after the shutdown. Find Hkey_local_machinesystemcurrentcontrolsetcontrolsessionmanagermemory Managementprefetchparameters Right-click Enableprefetcher and Enablesuperfetch to modify this data from (1 or 3) to 0, and then reboot.

Nine, the Quick Start system This function is shuts off the system to enter the picture, probably can save the 2-3s for you the start-up time, other option does not move, may have the negative influence. Press the keyboard win+r input msconfig, check whether no GUI guide is hooked up, if not please tick, OK.

Check if no GUI boot hooks up

Turn off Windows Search and SuperFetch Super pre-read.

The above small series introduction is about the WIN8 system to optimize SSD solid state hard disk 10 kinds of methods, although SSD solid state drive speed is relatively fast, but optimize SSD solid state drive is also very important.