How to partition a new computer hard disk

To partition the hard disk is a compulsory course of using a computer, if you have a series of hard disk partition planning, but not familiar with the hard disk partition, it is really regrettable. When we assembled a computer, we were about to install the operating system for the computer. All we have to do before installing the operating system is hard disk partitioning and formatting. So how to partition the hard disk? A lot of rookie friends on the hard disk partition and format are not enough to understand, the following small series on the details for the novice friends about how to partition the hard disk.

Partitioning of the hard disk partition tool, of course, now commonly used hard disk partitioning tool has PartitionMagic (that is, we often say the PM partition tool), Diskgenius. It is recommended to use the Diskgenius partition tool, because it is very simple operation, the operation of the Fool is more suitable for novice friends to use.

No matter what partitioning tool you use to partition your hard disk, you need to enter the DOS system or the WinPE system, which we recommend using the WinPE system. So how do you get into the WinPE system? There are two ways: booting into WinPE via boot CD (now on the market with the WinPE feature on the ghost version of the system disk), and another way to boot into WinPE via USB drive device (this way you need to make your own USB drive boot disk )

U disk Boot disk is also very good to do, to recommend a very useful U disk Startup tool: Http://down.diannaodian.com:90/diannaodian_v5.0.exe. Use this tool to make the U-disk boot disk very much, just plug your USB stick into the computer, and then run the tool. As shown in figure:

Choose your U disk, the other parameters are left to the default, and then click "One click to make Startup USB" on it, the whole process is about 1 minutes or so, so you have a lot of tools integrated with the U-disk Startup disk (note: Make a start U disk before making sure that there is no important data in the U-disk, the process will be

With the start-up tool (either the CD-ROM or the U-disk boot are collectively referred to as the "boot Tool") You also need to enter the BIOS of your computer to change the boot entry to a CD or USB flash drive. Now the computer generally can be on the boot when the F12 key to select the startup item, do not set the startup item friends please search in Baidu. After setting the startup item, the computer will boot to your USB flash drive or the optical disk system, here we take the USB drive WinPE system as an example.

After we get into the WinPE system by starting the U-disk, you will find that the WinPE system is very similar to the XP or Win7 we normally use, which is a graphical interface, which is why we recommend partitioning in the WinPE system, which is more than a DOS system. WinPE is better for novice users.

A set of WinPE system integration tools can be found in the "Start"--"program" inside. As shown in figure:

Now let's open the Diskgenius to partition the new hard disk:

Note: If your computer has more than one hard disk or a USB disk or a removable hard disk, select the hard disk you plan to partition before partitioning, as shown in figure:

You can then start partitioning the hard disk.

How to partition the new hard disk first step:

Select "Hard Disk"--"Delete all Partitions". As shown in figure:

Select "Yes" on the pop-up dialog to remove all the previous partitions of the hard drive so that you can work on subsequent partitions.

How to partition the new hard disk second step:

Select "Hard Disk"--"quick partition". As shown in figure:

The left can choose to divide the hard disk into several areas, according to their own needs to choose, generally choose 4 partitions on the line. The right part is the software partition of the hard disk (the digital 1,2,3,4 respectively represents the c,d,e,f disk), if you are not satisfied with the capacity of the partition, you can manually enter the capacity of the partition. Generally installed XP operating system C disk at least 10G or so, installed WIN7 C disk at least 30G. Finally click OK Diskgenius will automatically partition the hard drive for you. (The other parameters of this interface do not need to be changed, as the default is OK)

The partition of the new hard disk is done, is it very simple? This is thanks to Diskgenius partition software, if you want to use other partition software, you also need to set the main partition, extended partition, and finally set the C drive as active ... In contrast, partitioning with Diskgenius is ideal for small white users.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 Welcome to join