1. Click on the driver side software of Uber step
Login Uber, you will see a blue online button. Pressing the blue button means that you are on line and ready to receive orders;
2. When the passenger orders, the system will send a single to the nearest driver, automatic matching, do not need to rob a single
The driver has 15 seconds to click on the screen to receive the order; The small circle shows the passenger's position and the driver's position. The expected arrival time is indicated under the small circle;
Note: It is very important to receive orders, if the driver is not convenient to receive orders, please be sure to get off the line ahead. The rate of receipt is low, be complained of refusing hire, fabricate reason to let the passenger cancel or oneself cancellation all will affect the reward.
The driver may inquire passengers before loading, and if the place of the pin is accurate, the driver can carry the passengers in accordance with the navigation instructions; After loading the guest, the driver can enter the destination at the driver's end, click Start Navigation and follow the guideline to the destination. Drivers should be familiar with the navigation and actively use navigation.
5. The driver can click on the black [to the car position button] After reaching the passenger load.
6. When the passenger gets on the bus, the driver can slide the blue button, and once the Blue Start button is slid, the Uber will record the time and mileage to calculate the cost. Note: When the driver arrives at the passenger's boarding place, the passenger may not immediately get on the bus and advises the driver to wait 10 minutes Do not press the Start button if the guest is not in the car yet.
7. After the arrival, press the Red end button to end the trip, Uber will automatically calculate the cost, the total cost will immediately appear on the phone