How to quickly configure floating routes to achieve link redundancy and floating route link Redundancy

How to quickly configure floating routes to achieve link redundancy and floating route link Redundancy

1. Create an experiment environment
1. Router R1 \ R2 switch SW1 \ SW2 PC1 \ PC2
# Configure the port IP Address
R1 # interface gigabitethernet0/0/1
Undo shutdown
Ip address 192.168.2.1 255.255.255.0

# Interface route/0/2 undo shutdown ip address 192.168.4.1 255.255.255.0 # interface gigabitethernet0/0/0 undo shutdown ip address 192.168.1.1 255.255.255.255.0 # configure Static Routing and priority ip route-staeic 192.168.3.0 255.255.255.0 192.168.2.2 preference 110 ip route- staeic 192.168.3.0 255.255.255.0 192.168.4.2 preference 120

R2 # interface gigabitethernet0/0/0
Undo shutdown
Ip address 192.168.2.2 255.255.255.0

# Interface route/0/2 undo shutdown ip address 192.168.4.2 255.255.255.0 # interface gigabitethernet0/0/1 undo shutdown ip address 192.168.3.1 255.255.255.255.0 # configure Static Routing and priority ip route-staeic 192.168.1.0 255.255.255.0 192.168.2.1 preference 110 ip route- staeic 192.168.1.0 255.255.255.0 192.168.4.1 preference 120 # viewing the static route table dis ip routing the route table only displays static routes with high priority, if a route entry with a higher priority is broken, the route entry with a lower priority will appear in the route table. Table.