How to resolve "Access Denied" prompt when the XP system accesses the LAN Computer

When the Windows XP system accesses a LAN computer, the system prompts "Access Denied". If a problem occurs, the system prompts: You may not have the permission to use network resources. Contact the administrator of this server to check whether you have access permissions. Access denied. Note: The system prompts "Access Denied" instead of prompting other information! Www.2cto.com basic conditions for mutual access between Windows Network neighbors: QUOTE: 1) the computers on both sides enable and set up network sharing resources; 2) the computers on both sides add the "Microsoft network file and print sharing" service; 3) both parties have correctly set the IP address in the network and must be in the same network segment; 4) both computers have disabled the firewall, or the firewall policy does not block access by network neighbors. Solution: first, the problem about why Guest cannot be accessed: 1. By default, XP disables the Guest account. 2. By default, the Local Security Policy of XP prohibits Guest users from accessing the network. 3. By default, in XP's Local Security Policy-> Security Options, "account: users with empty passwords can only log on to the console" is enabled, that is, any account with a blank password cannot access from the network and can only log on locally. Guest has a blank password by default. Therefore, the simplest way to Access XP is to disable Guest, you only need to modify the preceding security policy to "classic. When other systems Access XP, they can enter their own account information (in my own practice, Guest and other users can still access the account normally with a blank password, as if there is no function, we recommend that you change this option if it is not feasible .) Therefore, if you need to use a Guest user to access XP, You need to perform the preceding three settings: enable Guest, modify the security policy to allow Guest to access from the network, disable the security policy in 3, or add a password to Guest. Www.2cto.com from the network neighbors-set up a home or small office network-according to your actual situation set in the working group to see it, is not accessible problem: in this case, the easiest way is to use IPC to connect to the ing network drive. Method: Open-my computer-tools-select ing network drive-set drive ID-set path (Click Browse) -Microsoft Windows Network-select your workgroup-enter the computer to be mapped (this can also be an IP address) -select the drive to be mapped-if the ing is completed successfully, it will automatically enter the ing network drive. At this time, you can see an additional network drive type in my computer, the following figure shows the connection of the network drive you mapped. The name is generally the local disk (f) on the 'computer name/ip'. If you want to disable the mapped network drive, select it directly, right-click and choose disconnect. Although shared by the other party, but do not have access to the other party's computer, how to choose the other party's drive from the above operation? First share a drive of your computer, it is best to use the default share name: Local disk (F), and then select your own drive from the browsing operations above, if the share is d disk, change your computer name or IP local disk (D) to the name of the other computer or IP local disk (F), and click Finish.