3G network card is widely used, but mobile phones, laptops and other terminals need to share the network, use TL-MR11U to convert 3G signal to Wi-Fi signal, to achieve Internet sharing. Insert your 3G Modem (3G Modem) and set the wireless network to meet your needs. As shown in the following figure:
3G application topology
Select the setting method you need to refer:
At home, you use the broadband account and password. In the company, you use static IP addresses (bound to MAC addresses) and dynamic IP addresses (authenticated Internet access) at the hotel ). Connect to the Mini router to Achieve Internet sharing. Select the routing mode and use simple settings to meet your needs.
Router Mode application topology
Note:: The Modem is not saved in the above topology. For more information about the connection topology, see the Router mode settings document.
Select the setting method you need to refer:
In office areas or hotels, only wired interfaces are provided. To connect wireless terminals to the network, wireless hotspots are required. The AP mode of the Mini router is equivalent to a "wireless switch", which enables wired conversion to wireless and provides wireless hotspots.
AP mode application topology
Note:If the hotel or company network limits the number of access terminals or only provides one ID authentication or IP address, the Router mode is recommended.
Select the setting method you need to refer:
The home already has a wireless router, but the study's signal is weak, and the bedroom cannot find the signal, so it is necessary to enhance the wireless signal and expand the coverage. Use the Repeater mode of the Mini router for Repeater amplification.
Repeater mode application topology
Select the setting method you need to refer:
The desktop must be connected to a wireless network, but there is no wireless network adapter. The Mini router works in Client mode and is equivalent to a wireless network card, which can help the desktop access the network.
Client mode application topology
Work mode introduction
3G (3G mode): inserts a 3G network card to provide a wireless network for Internet sharing.
Router (routing mode): it is used to connect to a broadband network, providing wireless access for LAN wireless terminals and sharing broadband Internet access.
AP (access point mode): converts a wired network to a wireless network and provides a wireless hotspot for use as a "wireless switch.
Repeater (relay mode): Relay scales up existing wireless signals to expand wireless coverage.
Client (Client mode): equivalent to a wireless network card, connected to an existing wireless network, a computer connected to a Mini router can access the network.
You can also send a detailed requirement description to the fae@tp-link.com.cn, and we will guide the application setup method for your needs.
