How to Set a wireless router to a wireless switch or a wireless router switch
There are many vro brands on the market, but most of them are home-based routers. The structure settings are similar. First, you need to understand the vro first.
1. Interface Description: The back interface uses this as the power plug-in from the left, and the wan Interface (the port connecting the adsl or residential broadband network cable of China Telecom or China Netcom, which is generally in an independent color, the wan symbol is shown below the interface). The four interfaces are lan interfaces, which are marked with 1, 2, 3, and 4 characters in the same color and are used to connect to the computer.
2. Restore factory settings: The vro backend has a small hole, such as a matchstick, which becomes the reset key. It is used to restore factory settings when the vro cannot log on to the vro.
A wireless router has many functions. It can be used either as a wired or wireless router or as a switch. When implementing wireless functions in an existing wired network, you can use a wireless router as a Wireless AP (Wireless switch). The configuration steps are as follows:
1. connect to and log on to the wireless router, and change the IP address of the LAN port of the wireless router to avoid conflicts with other devices in the intranet.
2. Disable the DHCP function of the wireless router and restart it.
3. Connect the 1/2/3/4 port of the wireless router to the vro or vswitch in the Wired Network.
4. Connect the wireless network card in the operating network to the wireless route.
5. Configure the network parameters of the wireless network adapter (automatically obtained or manually configured, and manually configured parameters are consistent with those of the wired network.
You only need to follow the steps above to change the wireless router into a wireless switch.