How to set ADSL Network Connection and dial-up connection in Windows 7 (1)

I. How to set up the Windows 7 ADSL Network Connection

Many home users and small-sized commercial users use ADSL to access the Internet. Therefore, I would like to provide a special description:

1. The connection model is computer-router-adsl modem lan connection settings

A. On the Control Panel-network and sharing center, set the current network type and select work network ), if the IP address is not special, you do not need to set the company office. Generally, you can consider assigning an IP address to consider sharing), the router will automatically assign the computer a runtime IP address, which is generally an intranet address ). Such as the middle part of 1 ):

B. Configure the automatic dialing function for the vroadsl

The method is: power on the router, open the browser and enter the IP address of the router, generally 192.168.1.1, you can enter ipconfig in CMD to view the IP address of the gateway ), enter the login account and password of the vro. Generally, the management interface of most residential or small-sized commercial routers is similar to 2:

For the TP-LINK R402 management interface, you can in the network parameters-WAN port settings, enter the Internet account and password telecommunications or Netcom for your installation left for you ), select Automatic Connection under, so that every time the router and ADSLMODEM are powered on, it will automatically control the ADSL login network, without manual intervention. Other vro settings are similar.

C. After the configuration is complete, you only need to confirm whether the vro can connect to the network normally. In the early Windows XP, you still need to create a network connection every time, it seems that Windows 7 is also saved. By default, all tasks are completed by the operating system.