How to set IP Address setting method for computer IP address

Using a broadband router It is generally recommended to manually specify the computer's IP address and DNS and other parameters, set the method reference below.

If you are using a Windows 2000 or Windows XP system, please click on "My Network Neighborhood"?? > "Local Area Connection"?? > "Properties"?? > Internet Protocol (TCP/IP) properties, you will see the following interface:

Figure 1 Internet Protocol (TCP/IP) properties

IP address: 192.168.1.X (2≤x≤255), and router LAN port a network segment;

Subnet Mask: Default, 255.255.255.0;

Gateway: 192.168.1.1 (default address for router LAN port);

Preferred DNS server: Consulting ISP;

Standby DNS server: Consulting ISP;

If you change the router's LAN port IP address, the computer's IP and gateway also need to make the appropriate changes.

If you are using a Windows 98 system, please click on "My Network Neighborhood"? > "Network"?? > "Properties", as shown in Figure 2:

Figure 2 Setting TCP/IP Properties

Click on the attribute as shown in Figure 3:

Figure 3 Configuring an IP address

After configuring the IP address, you also need to configure the gateway, as shown in Figure 4:

Figure 4 Configuring the Gateway

Finally, you will need to configure the DNS domain name server, as shown in Figure 5:

Figure 5 Configuring a DNS server

If you are using the Vista system, The configuration of the network parameters of Vista system is: Open "Network Neighborhood"? Local connection "?" View status "?" Internet Protocol version 4 "?" Properties ":

Now you can log in to the broadband router!