How to set IP bandwidth control for tl-wr2041+

tl-wr2041+ Set IP Bandwidth control diagram Step one: Set the computer IP address

Tp-link tl-wr2041+ routers restrict network speed topology

Example analysis

A user home for 4M ADSL Broadband, the home has desktops, notebooks, mobile phones and many other devices; Desktop is mainly used to watch video, play games, so the need to ensure that the desktop computer has enough broadband resources, colleagues have to ensure that other devices can normally browse the Web, chat QQ and so on.

The subscriber line is 4M ADSL line, uplink bandwidth is 512Kbps, downlink bandwidth is 4096Kbps. Combined with user requirements and total bandwidth, the allocation rules are as follows:

Analysis of Tp-link tl-wr2041+ routers restricting network speed requirements

In order to give priority to the speed of the desktop computer, the IP address of the desktop computer should be set to static IP, this example is 192.168.1.10; The IP address of the other device is set to automatically obtain.

tl-wr2041+ set IP Bandwidth control diagram Step two: tl-wr2041+ limited speed (IP broadband control) settings

1, Login Settings interface

Please enter in the browser's address bar: tplogin.cn to log in, the login password is the user in the tl-wr2041+ router fuselage Setup Panel set the administrator password.

Enter tplogin.cn Login tl-wr2041+ router

2, click "IP Broadband Control"--> "Broadband Line type": ADSL line (if you are not ADSL broadband, select other lines)--> "Uplink total broadband" fill:512--> "downlink total Broadband" Fill:4096--> click "Save".

To set the IP broadband control parameters on the tl-wr2041+ router

Pay attention to the problem

(1), 1kbps=8kbps,1m=1024kbps=128kbps; so 4m=4096kbps.

(2), broadband operators and routers to calculate the size of the broadband unit is Kbps, and the computer is Kbps, so 1M broadband, download files, the computer display the maximum speed of only about 100KBps.

(3), downlink Broadband: Refers to the maximum speed when downloading, we handle the broadband resources, in fact, according to the largest downlink broadband to determine. For example, to handle the 4M broadband, then the largest downlink broadband is 4096Kbps.

(4), Uplink broadband: upload resources When the broadband, is generally downlink broadband 1/8; For example, 4M Broadband, downlink broadband size is 4096Kbps, then the largest uplink broadband should be: 512Kbps.

3. Click "Add New Item"

4, limited desktop computer network speed

Click "Add Entry", then in "Start Address" and "End address" to fill out:192.168.1.10--> "Uplink bandwidth minimum Bandwidth" for 300--> "uplink maximum bandwidth" for 500--> set "downlink minimum broadband" for 1500--> " Maximum downlink bandwidth "for 3000--> click" Save ".

Set rules for restricting desktop speed on tl-wr2041+ routers

Warm tip: "Port segment", "Protocol" two options remain the default, do not set.

5, limit the speed of other equipment

Click "Add new Entry"--> start address "fill:192.168.1.100-->" End Address "fill out:192.168.1.254-->" Uplink bandwidth minimum Bandwidth "for 200-->" uplink maximum bandwidth "for 500--> Set "downlink minimum broadband" for 2500--> "maximum downlink bandwidth" for 3500--> click "Save".

tl-wr2041+ routers set limits on other device speed rules

Note: The default DHCP address pool is 192.168.1.100-192.168.1.254. A terminal that automatically obtains an IP address obtains an IP address from the address pool.

6, open "IP Broadband Control"

Check "Open IP Broadband Control"--> Click "Save".

tl-wr2041+ router to enable limited network speed (IP broadband Control) features

At this point, completed the Tp-link tl-wr2041+ Router Limited speed (IP broadband control) settings, desktop can achieve downlink minimum 1500Kbps of bandwidth, other terminals share the minimum 2500Kbps total bandwidth, all kinds of terminals can achieve corresponding bandwidth requirements.