How to set the router static IP

Static IP is divided into two types, one is long-term fixed to a computer or route to use the IP address, General fiber network, or through the fiber or network cable connected to the domain will adopt fixed IP. The other is that no lines are connected to the Internet by a fixed IP assigned by the company.

1

First, the computer through the network cable or wireless networks landing on the router, some routers can set up the external network access to the port and IP, users can be in a non-LAN landing router

2

In the router, go to the extranet configuration, then select the WAN Point "edit" where you want to configure the static IP

3

Select the static line in the routing type city, then enter the fixed IP address, subnet mask, default gateway, DNS server and other parameters after the point "save" completes the static routing Setup

4

After the setup is complete, you can check the status query to see if the link you just set is in effect, and if you are not connected to the Internet, you need to check the dynamic IP and DNS settings correctly.

No lines are configured by static IP

1

First, use a network cable or wireless connection to the LAN port of the wireless router to insert the network cable from the carrier or company master route at the WAN port.

2

Behind each router will be affixed to the router's IP,MAC address, the initial wireless password, connect user name password and other parameters, set up the computer and router LAN port in the same address section

3

Open IE, login to the wireless router Web address, and then enter the username password to enter the login interface

4

Click on the WAN port settings under the network parameters, then select the WAN port connection type, input the IP, subnet mask, gateway and DNS post to save the configuration of static IP.

5

After restarting the route, you can see the parameters just configured in the running state.