How to set the IP bandwidth control function of tplink router TL-WR2041

Source: Internet
Author: User

View version

Locate the labeling position on the product housingSerial NumberColumn hasVer(Version/Version). This information is the hardware Version of the product. As shown in the following figure:

Note:In the hardware version, Ver: n. m = Ver: n.0. For example, if the hardware version of the product is Ver: 4.3, the hardware version is Ver4.0. As shown in the following figure:


V1.0-v2.0 configuration

Topology of TL-WR2041N application
A user using TL-WR2041N for broadband Internet sharing, the need to ensure that the intranet desktop game, video normal application, at the same time ensure that other terminals can normally browse the web page, QQ chat and other basic applications.
The user line is a 4 m adsl line, the uplink bandwidth is 512 Kbps, and the downlink bandwidth is 4096 Kbps. Based on user needs and total bandwidth, the allocation rules are as follows:
Note:: This table is for reference only. The allocation value is subject to the actual situation. In this table, other terminals share the allocated bandwidth.
Allocation principles:Make sure that the sum of the minimum bandwidth does not exceed the total bandwidth.
To meet this requirement, you need to configure a fixed IP address (192.168.1.10 in this example) for the desktop, and other terminals such as computers and mobile phones will automatically obtain the IP address. If you do not know how to manually specify an IP address for your computer, click here for reference:
Note:You must manually specify the IP address, Gateway, DNS, and other parameters for the desktop.
1 Set line parameters
Click IPBandwidth Control>Control settings, Select the broadband line typeADSLLine.
Enter the total uplink bandwidth 512, enter the total downstream bandwidth4096. ClickSave. As shown in the following figure:  
Note:The bandwidth value here is for reference only. In actual application, you need to enter the actual bandwidth value of the bandwidth line.
2 Add desktop rules
Enter IPBandwidth Control>Control rules, ClickAdd new entry, Fill in both the start address and end address192.168.1.10.
The minimum uplink bandwidth is 300, the maximum bandwidth is500, set the minimum downstream bandwidth1500, the maximum bandwidth is3000, Click after settingSave.
3 , Set other terminal settings rules
Click Add new entry. Enter the start address and end address respectively. 192.168.1.100 and192.168.1.254.
The minimum uplink bandwidth is 200, the maximum bandwidth is500, set the minimum downstream bandwidth2500, the maximum bandwidth is3500, Click after settingSave.
Note:: The default DHCP address pool is 192.168.1.100-192.168.1.254. All terminals that automatically obtain the IP address will obtain the IP address from the address pool.
4 , Enable IP Bandwidth Control
Enter IP Bandwidth Control > Control settings, Select Enable IP Bandwidth Control, Click Save.
So far, the IP bandwidth control settings are complete. The desktop can achieve a minimum downstream bandwidth of kbps, while other terminals share a total bandwidth of at least KBps. Various terminals can achieve the corresponding bandwidth requirements.


V3.0 configuration method

 

To meet this requirement, you need to configure a fixed IP address (192.168.1.10 in this example) for the desktop, and other terminals such as computers and mobile phones will automatically obtain the IP address. If you do not know how to manually specify an IP address for your computer, click here for reference:
Note:You must manually specify the IP address, Gateway, DNS, and other parameters for the desktop.
1 Set line parameters
Click IP Bandwidth Control, Select the broadband line type ADSLLine.
Enter the total uplink bandwidth 512, Enter the total downstream bandwidth 4096, Click Save. As shown in the following figure:
Note:The bandwidth value here is for reference only. In actual application, you need to enter the actual bandwidth value of the bandwidth line.
2 Add desktop rules
Click Add new entry, Fill in both the start address and end address 192.168.1.10.
The minimum uplink bandwidth is 300, the maximum bandwidth is500, set the minimum downstream bandwidth1500, the maximum bandwidth is3000 click after settingSave.
3 , Set other terminal rules
Click Add new entry. Enter the start address and end address respectively. 192.168.1.100 and192.168.1.254.
The minimum uplink bandwidth is 200, the maximum bandwidth is500, set the minimum downstream bandwidth2500, the maximum bandwidth is3500 click after settingSave.
Note:: The default DHCP address pool is 192.168.1.100-192.168.1.254. All terminals that automatically obtain the IP address will obtain the IP address from the address pool.
4 , Enable IP Bandwidth Control
Select Enable IP Bandwidth Control, Click Save.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.