How to set the primary hard drive and from the hard drive in the BIOS

The following methods are set up for master and slave drives in the BIOS:

(1) In the BIOS Setup main interface, select the "Standard CMOS Features" option, press "Enter" button, enter the Setup interface.

(2) To set the first hard disk as the primary disk, select the "User" option in the type (hard disk type) option in Primary Master and set mode (hard drive mode) to "LBA".

(3) Set the "type (hard disk type)" of "Primary Slave" to "None".

(4) Set the second hard disk to from disk: In the type (hard disk type) option in secondary Master, select the "User" option and set mode (hard drive mode) to "LBA".

(5) Set the "type (hard disk type)" of "secondary Slave" to "None".

(6) Save and exit the BIOS settings.

BIOS Entry Method

Enter the way to edit different BIOS has different access methods, usually in the boot screen is prompted.

PC Entry Mode Award BIOS: Press "del" key AMI BIOS: Press "del" or "ESC" key Phoenix BIOS: Press "F2" key Acer: Press "Del" key

Other enter IBM (Cold boot Press F1, some new numbers can be started by pressing F1 at reboot (press F2 on startup and restart) Sony (F2 on startup and reboot) (press F2 on startup and reboot) (press F2 on startup and restart) Toshiba ( Press ESC and press F1 on cold boot to HP Compaq (press F10 when the flashing cursor appears on the upper right corner, or press F10 on power-on) Fujitsu (Press F2 on startup and reboot) Most domestic and Taiwanese brands (press F2 on startup and restart)

Toshiba entry mode: Toshiba Notebook Problem Description: How to enter the BIOS Setup interface solution: You can access the BIOS setup interface in the following 2 ways: 1, from Windows Control Panel (except satellite 17xx,30/31,3000 series machines). To launch the Toshiba Hardware Setup program, the Toshiba Hardware Setup program provides a user-friendly graphical interface to modify the BIOS settings. Please note that if you change some settings, you must restart your computer before it can take effect. The Toshiba Hardware Setup program is pre-installed in the Toshiba notebook computer. He can also be downloaded as part of the Toshiba utility program. 2, in the system to carry out the self-test process while holding down the ESC key (satellite 17xx,30/31,3000 series machine startup, hold down the F12 key, SATELLITE5XXX series DOS-free mode of the BIOS setup interface, can only be set by the first way). To use this method, you must turn off the computer first, and the suspend or hibernate state is invalid. First press the boot button to power on, and then quickly hold down the ESC key (or you can press ESC first and then power on). When the system self-test is complete, the user will be prompted to press F1 to enter the BIOS interface. Press the F1 key to enter the BIOS at this time.

Lenovo into the way different Lenovo models of notebooks, access to the bios of the hotkey is also different. The following is a list of key keys to enter the ThinkPad BIOS Setup program: ThinkPad 315ED (when the ThinkPad logo is displayed, press F2 to enter the BIOS Utility.) ThinkPad 365x/xd series ThinkPad 380 series ThinkPad 560 series ThinkPad 600 series ThinkPad 755 series ThinkPad 760 series, 765 series ThinkPad 770 series (host shutdown, Hold down the F1 key and open the host. Hold down the F1 key until an easy setup screen appears. The ThinkPad 240 series ThinkPad 390 series ThinkPad 570 series ThinkPad I series 1400ThinkPad I series 1200ThinkPad a20m,a20p,a21m,a21p,a22m,a22p, A30,a31thinkpad T20,t21,t22,t23,t30thinkpad X20,x21,x22,x23,x24,x30,x31thinkpad R30,R31,R32 (when the ThinkPad flag appears during startup, Press the F1 key. The ThinkPad g40,thinkpad r40,r40ethinkpad r50,r50pthinkpad t40,t40p,t41,t41p (during boot up "to interrupt normal startup,press The "Blue Access IBM button", by pressing the access IBM buttons, enter the IBM Predesktop area, select the start Setup utility in the interface to enter the BIOS) ThinkPad 315ED ( After the boot, when you see the screen on the ThinkPad logo, quickly press the F2 key to enter the BIOS. ThinkPad 365x/xd series ThinkPad 380 series ThinkPad 560 series ThinkPad 600 series ThinkPad 755 series ThinkPad 760 series, 765 series ThinkPad 770 Series for the above series of books, you can press and hold the F1 key on the power-on, until the screen appears easy setup screen. ThinkPad 240 series ThinkPad 390 series ThinkPad 570 series ThinkPad I series 1400ThinkPad I series 1200ThinkPad A series ThinkPad T series ThinkPad X series ThinkPad R series (after powering up, when you see the ThinkPad logo on the screen, quickly press the F1 key to enter the BIOS.) )

Compaq access Mode Most Compaq machines are pressed F10 to enter the BIOS setup when they are powered on. Applicable products: Presario 800Presario 1200Presario 1400Presario 1500Presario 1520APPresario 1530SCPresario 1531APPresario 1600Presario 1700Presario 1800Presario 1900Presario 2100Presario 2500Presario 2700Presario 2800Presario 2830Presario 800XLPresario 900 of the following models are special: Armada 6500 (press fn+f3) Deskpro Exm/evo d300vm (press DELETE) the BIOS setup interface does not go to the solution: Failure phenomenon: computer boot into the BIOS setup program, In addition to setting the "User password", "Save Modify Exit" and "Do not save Exit" 3 items, no other access. Workaround: This is usually the case because the CMOS is compromised and the discharge processing is tried. If the failure still exists after the CMOS discharge, you can also try to upgrade the BIOS method, if the failure is still unresolved, it may be a problem with the CMOS memory, as long as the replacement of the memory can be.