How to set the router IP auto-Changer

The use of the router IP auto-changer can help us automatically allocate IP addresses. In the following article, we will explain the configuration of the router IP auto-changer in five steps. This article also comes with a lot of vroip IP auto replicator for your convenience to download and use.

Vroip IP auto-Changer

1. Set the vro Model

Generally, it will be directly labeled on the vro. You can find it by yourself. If you cannot understand it, ask the person who helps you buy the vro, you can also ask the store about the model. The router specification will also be available. When you confirm the router Model and cannot find it on the software, you can first try the option of the same brand of the router Model. When the router Model is incorrect, what is displayed on the log page is, an error occurred while sending the command. Other errors do not indicate incorrect model selection.

2. vro address management IP address)

Generally, it is 192.168.1.1 and 192.168.0.1. The possibility of other IP addresses is relatively small. When the IP address is incorrect, the entry in the log page is "the target host cannot be reached, it may be because the router IP address is incorrect." If this is not the case, right-click "Network Neighbor" and choose "properties". In the "Network Connection" window that is opened, the active connection is generally "Local Connection "), right-click the status. In the new status window, click the "support" tab and find the "Default Gateway" in "connection status". Generally, this is the IP address of your router.

3. login username and password of the vro

First of all, it should be clear that this is not the ADSL account password, but the user name and password you use to log on to the vro management interface; that is to say, you need to have the management permission of this vro, otherwise, it cannot be used. These two parameters are also marked on the vro. The default value is "admin/admin" or "admin/empty password", which must be included in the Manual. If the user name and password have been changed, I think you should know what the user name and password have been changed. If not, ask the person who changed the user name and password. Don't ask me, I cannot know the account and password of your vro. By the way, the vro logon password cannot be blank. If it is blank, log on to the vro Management page and modify it.

4. Status page

This feature was added later, so no IP address is added to the router interface in the policy. The current method is to obtain an IP address from a public address, so the speed is slow, if you encounter a website fault or something, you still have no response. Let's talk about its setting method. Go to the "Policy directory, find your own vro model, and use NotePad to open it. If there is already a" [Status] "section, you do not need to set it yourself. If it does not exist, set it. Add the following three lines to the end of the file:
◆ [Status]
◆ IPPos = 3
◆ IPPage =/status.htm
◆ IPPage =/status.htm means to get its public IP address from the/status.htm page in the router. This value needs to be set according to your own situation;
◆ IPPos = 3 indicates taking the third IP address that complies with the IP rules. 255.255.255.255 is also an IP address. You need to set this value as needed. If you are not sure, you can also try it from 1...

5. Others

You can fill in the configuration items of the router IP automatic replacement device. After modifying the settings, click "Save configuration. IP address change process: log on to the vro Management page and click "Disconnect". after a certain period of time, click "Connect. After understanding this, you will know why the network will be disconnected when you use this software to change the IP address.

If the software prompts that the IP address has been successfully changed, but it is still not changed, that is, your ISP China Telecom/China Netcom or something) has made the disconnection time limit. You can try this: log on to the vro Management page, find the WAN settings page, find the "online mode" or similar option, and set it to "Manual Online ", on the software interface, the option "disconnect and wait for N seconds before redial" is set to a greater value, for example, 60 seconds before testing. If the option is successful, the limit is successfully exceeded, if not... Then I cannot help myself ~~ Otherwise, try to increase the value.

Detailed description
1. Select Your vro model from the vro model.
2. Set the replay interval as needed
3. Wait for 1 second after disconnection.
4. the IP address of the vro, most of which are 192.168.1.1, and some are the port number 80 after 192.168.0.1. Do not modify it.
5. the user names and passwords of most vrouters are admin. Some vro user names are admin and the password is empty. You need to log on to the vro management background from the web page and set the vro password.
6. Click test (or press "F4" on the keyboard to switch the IP address at will .)

The following message indicates that the ip address is successfully switched.
◆ 2009-1-2211: 44: 39: logon successful.
◆ 2009-1-2211: 44: 39: Try to disconnect the network...
◆ 2009-1-2211: 44: 42: Wait 1 second before reconnecting!
◆ 2009-1-2211: 44: 43: Try to reconnect to the network...
◆ 2009-1-2211: 44: 48: the reconnection operation has been completed!

Vroip IP auto-changer:
◆ Http://download.csdn.net/source/1280951
◆ Http://www.xpstzx.cn/soft-44/info2425095.html
◆ Http://bbs.icafe8.com/thread-46354-1-1.html
◆ Http://www.chkh.com/Soft/HTML/1977.html
◆ Http://www.e666.cn/soft/down/soft_10878.html
◆ Http://pickup.mofile.com/2893053326395892
◆ Http://www.xdowns.com/soft/softdown.asp? Softid = 42865
◆ Http://youa.baidu.com/item/88fc04ed18ea5b37a5ab2119

What is the concept of an automatic router IP replacement?

The dhcp function of the vro is to automatically allocate IP addresses. For example, if two computers access the Internet at the same time, you may obtain the IP address 192.168.0.2 first and then start the instance at 192.168.0.3, Which is random) on the second computer the next day, you may get the IP address you used yesterday. After dhcp is enabled, the ip address may be different or cannot be obtained.) Prerequisites: do not set the ip address in the TCP/IP protocol of your Nic, otherwise, dhcp will not assign you an ip address. The ip address you set manually will be used each time you start the system.