How to set the speed limit of the Linke Wireless Receiver

It is a long-lasting topic to set the local area network speed limit for the lingke wireless transmitter. In order to prevent people in the Intranet from occupying too much network bandwidth, such as watching videos and P2P software online, others may not be able to access the Internet normally. Today, I will introduce the speed limit METHOD OF THE lingke wireless router. I. Software speed limit: The software limits the speed of the lingke wireless router, which is very simple and convenient but not practical. If the other party has installed the arpfirewall or is used by many people at the same time, it is also easy to conflict with the LAN, as a result, no one can access the internet. Therefore, this method is not recommended.
2. Lan speed limit: log on to the vro management interface and set the lowest rate or highest rate for each IP address in advanced settings options: Go to the wireless receiver settings page, in advanced settings-select QoS settings-vro speed limit: (1) Name: Rule name; www.2cto.com (2) group: select the group to be added; (3) MAC address: enter the MAC address of the computer Nic; (4) Destination IP Address: Enter the destination IP address to be controlled; (5) Source IP Address: Enter the local IP address; (6) package length: set the data packet size through the generator; (7) DSCP: The difference Service Code Point, which uses the encoding value to differentiate the priority. There is no special need here. You can save the default value without setting it; (8) Protocol: control over certain protocols. We recommend that you use the second method, that is, speed limit of the router and reasonable bandwidth allocation. Everyone can enjoy the internet. This article is from