How to set the WAF router for Web Authentication

For telecom internet users, that is, the Telecommunications Department assigns an IP address to the user and requires Web authentication to access the network. The specific settings are as follows on the youxun router:
1. Enter the gateway, IP address, subnet -www.2cto.com-mask, DNS, and other information provided by the Telecommunications Department on the WAN interface configuration interface of the youxun router;
2. The computer is connected to the LAN port, and one of them performs Web authentication as the master computer;
3. After the authentication is passed, the computer will not be shut down; otherwise, the network will be interrupted and other computers will be able to access the Internet;
4. If the master computer is shut down, you can use another computer for Web authentication to re-connect to the network.
So far, the WAF router has been set up. This article is from