How to Set up a connection between a telecom Optical Fiber cat and a tplink Wireless Router

How to Set up a connection between a telecom Optical Fiber cat and a tplink Wireless Router

In my home, the optical fiber cat is connected to the tp-link router, one desktop computer, two mobile phones and one tablet computer. I encountered a lot of thorny problems. I checked n more information on the Internet and finally solved the problem. I will summarize it as follows and share it with you.

Back to business

Connect the device

Steps:

1. Without a cat. In the IE browser, enter 192.168.1.1 To Go To The vro settings page. Set the ip address of the lan port to 192.168.2.1 to avoid conflicts with the ip address of the optical fiber cat ).

2. In the "Settings wizard", select the dynamic IP address. Set a wireless password. The wizard settings are complete.

3. This step is the most critical and is not mentioned in many strategies. In "clone MAC address", click "clone MAC address" and save.

4. Enable the server in the route "DHCP server. Address range: 192.168.2.100 ~ 192.168.2.199.

5. Plug the optical cat network cable into the WAN port of the route.

6. The vrodhcp enables DHCP. On the vrodhcp settings page, enter DHCP, set the gateway and DNS as the vro IP address 192.168.2.1, and save the settings.

7. All network parameters on the computer are set to automatically obtained.

The current residential area has already covered optical fiber. The method for setting up the Internet using a wireless router is different from the method for setting the Internet using ADSL. Although there are many online tutorials, many key points are not mentioned, you only need to set the above method to solve the problem.