How to set up a hi-tech router

　　First, high-tech wireless router installation

The hi-tech router, like other routing installation methods, first needs to connect the router's WAN port to the cat (Modem) LAN port, if it is a fiber user, without the cat, the fiber network cable directly into the router's WAN pull.

A picture to understand high-tech wireless router installation

A router's LAN four interfaces can optionally be connected to a computer's Ethernet interface. Finally connect the power cable to the router, complete the connection of all lines, you can proceed to the next step of the router settings.

Second, high-tech wireless router set up a tutorial, here to high-tech q307r wireless router settings for example, the demo of the computer system for the Win7.

A) Check the local IP settings

1, first in the computer desktop, with the right mouse click "Network" appears as the following image interface, click "Properties", as shown in the following figure.

2, the left mouse button click "Local Connection" and then click "Properties", as shown in the following figure.

3. In the local connection properties setting, double-click Internet Protocol version 4 (TCP/IP), as shown in the following illustration.

4, the setting here to "Automatically get IP Address" and "Automatically obtain DNS server address", finished click on the bottom of the "OK."

Note: The general computer default settings are automatic access to IP and DNS, if not previously set up the local IP, the above four steps can be ignored, is the high branch wireless router set up formal steps.

　　B High-tech Q307R wireless router setup steps

1, open the Computer Browser, and then type the address: 192.168.1.1 finished, press ENTER to open, as shown in the following figure.

Figure I

2, in the pop-up high-tech page password landing box enter the password, the default password is: Gaoke, enter the password, click on the bottom of the "landing", as shown in the following figure.

Figure II

3, in the "Internet Settings" interface to enter your dial-up Internet user name and password, and then click "Clone MAC Address" Set the router's WiFi password, and then click "Save", as shown in the following figure.

Hi-Tech q307r wireless Router setup diagram

Note: dial-up username and password is the network operator to provide you with the Internet Broadband account password, WiFi password is the need to set up for the notebook or smartphone connection used, the password as much as possible to set up a complex, to prevent the network from being rubbed.

4, after the save is completed, the page automatically jumps to the "Device Status: page, check the WAN information", "Connection status" display "PPPoE connection", then the setting is successful, you can surf the Internet, as shown in the following figure.