The Router mode of the mini-type wireless Router enables broadband Internet sharing and provides wireless networks for wireless terminals such as mobile phones, tablets, and laptops. This document describes how to quickly set the Router mode of a mini-type wireless Router.
You can also refer to the video tutorial on setting up the mini-type wireless Router mode. Click to visit:
Based on different home broadband lines, three access modes are available: network cable, telephone line, and optical fiber.
Router Mode shared bandwidth circuit diagram
Normal status of the indicator light: connect to the network cable. The light will remain on after 10 seconds.
1
, Set computer wireless network card parameters
Before setting a vro, you must set the wireless network card of the operating computer to dynamically obtain the IP address. If you do not know how to set it, refer:
2
, Adjust the hardware switch of the router
Adjust the hardware switch on the vro
ROUTER, as shown in the following figure:
Search for the wireless signal of the router and connect it. The default wireless signal name of the router is
TP-LINK _×××××× (MACThe last six digits of the address). For example, the MAC address is0C722C2C4AFAThe default wireless signal name of the vro isTP-LINK_2C4AFA.
If you do not know how to connect to the wireless network, please select the operating system corresponding to your computer on the following icon, follow the instructions to set:
1
, Enter the management address
Open ie on the desktop, clear the address bar, and enter
Tplogin.cn(Management page). After you press enter, the logon box is displayed.
2
, Logon Management Interface
If this is the first login, you need to set the management password of the router. In
Set password
In
Confirm password
And click
OK. If you have set a password, enter the password to go to the management page.
If you cannot log on to the management page after entering the management address, click to reference:
1
Start setting Wizard
Go to the vro management page and click
Setup Wizard, Click
Next Step.
2
Set wireless parameters
SSIDThat is, the wireless network name (which can be set as needed). Select
WPA-PSK/WPA2-PSKSet the PSK wireless password and click
Next Step.
3
, Select the Internet access method
If you use the bandwidth account and password allocated by the carrier for PPPoE dial-up Internet access, follow the instructions in the article to continue setting. For other internet access methods, select and refer to the corresponding setting process:
If you do not know how to access the Internet, click here:
Internet access method selection
PPPoE
(
ADSL
Virtual dialing), Click
Next Step.
4
, Enter the Internet broadband account and password
Enter the broadband account and password provided by the carrier in the corresponding settings box, and confirm that the account and password are entered correctly.
5
Complete setup wizard
Click
CompleteThe setup wizard is complete.
Connect the computer to the modified wireless network, enter the vro management interface, and click
Running status, View
WANPort statusIf the IP address is not 0.0.0.0, the setting is successful.
Now, the network connection is successful and the vro has been set up.
