How to set up 2 or more routers to connect a broadband not to drop the line

Teach you how to set up 2 or more routers to connect a broadband do not drop the line, see other technician's post, help him correct

He first method method one: Very simple is to use a network cable from the first router to boot any port on the second router's LAN, remember that it is not allowed to plug into the WAN port. This method is generally used by more people, basically no technical content. So long as the first route is connected to the cat. Set up to be able to access the Internet can be used for a second router. This is sure to drop the line, two routers, the same IP segment will conflict, will continue to drop the line, the 2nd router must be set to 192.168 IP segment. 2.1 will not drop the line, this method can also, not easy to use must be connected to each computer router to set IP is very troublesome

I said the 2nd method is very easy to use: is set up 1, the first router normal set up on the Internet can be 2, first of the 2nd router alone connected to a computer, into the settings, the first is to set the IP segment into 192.168.2.1, this will restart the router, Restart the router to enter the 192.168.2.1 in order to go in, in point Wan port settings set to static IP

The following DNS server to fill your own local DNS server IP save can also have a wireless set password to save the OK, the last is to get a network cable to take the 2nd router WAN port even the first router LAN port, now it is certainly easy to use.

If you do not understand, please leave a message, I will reply when I am online.

After three routers 1, first the 3rd router alone connected to a computer, into the settings, the IP segment set to 192.168.3.1, this time will restart the router, restart the router to enter the 192.168.3.1 in order to go in, into the point of the WAN port settings to set static IP

Wan Port 192.168.1.2 to 192.168.1.244 normal can be, but 192.168.1.2 and 192.168.1.100 the two have the best not to do with the basic is to pick up a network of random router LAN port to the just set up the router WAN port,

Four five routers, and so on, mainly remember that IP and IP segment is not the same as the conflict fell off the line OK.