How to set up AC function to manage wireless AP

AC function Manage wireless AP First step, connect AP

Example Model tl-er6520g

Different types of AP power supply methods may vary, including DC power supply and network cable power (Poe power supply) two kinds. As follows

[1] DC power supply

Use a self-contained power adapter to power the AP, requiring the AP to be placed at a power outlet, with the advantage of cost savings. Connect according to the topology map.

[2] Cable power supply

The use of network cable to the AP power supply, simple, beautiful, but required with a POE switch (power supply), the cost is high. The following figure

AC function Manage wireless AP Step Two, configure address segment

In order to facilitate the control of the students and employees of the Internet access, preconfigured address segments, if you do not need to go directly to the next step.

Log in to the router management interface to add address segments to the object management >> IP address pool.

The default already has an employee network address segment office_2.4g and office_5g, add a guest address pool. As follows

Note If the guest address segment address is insufficient, you can shorten other address segments.

AC Function Management wireless AP Third step, configure wireless parameters

Below we only take the 2.4G wireless setup as an example, the actual use of 2.4G and 5G as needed.

Enter the wireless management >> wireless basic settings and modify the default entries in the Wireless networks list as follows

Follow the instructions below to set up an employee network

Add student wireless network, as follows

Note that students are not allowed to access each other, you can open internal isolation.

After the addition is complete, the list is as follows

Follow the settings above to set the 5GHz wireless basic settings as well.

AC Function Management wireless AP Fourth step, AP Management

When the line is connected, AP can be found in wireless management >> AP Management. As follows

Click on the corresponding AP Change button, modify the corresponding settings, as follows

After the modifications are as follows

According to the above steps, set up other AP, the follow-up can be convenient management control.

Finally, click Save Configuration

AC function to manage wireless AP related knowledge

1. How many AP can be connected?

The router supports up to 5 AP management.

2. How big can the Max belt machine reach?

The router itself has a wireless signal that the 2.4G supports 50 clients. If you access 5 single frequency (2.4G) wireless APs, you can add 150 clients, that is, the theoretical maximum support of 250 client access.

Due to the number of routers (recommended in 50 or less) as well as broadband bandwidth restrictions, will not access to the terminal theory.

3, how to see each AP connection several terminals?

You can see the number of clients in each band in the AP list, as follows

4, can't find AP How to do?

If you cannot find the AP, please note the following points

[1] The AP switches to fit mode (if there is no switch, there is no need to switch);

[2] AP power supply is normal, LED light;

[3] The AP and the router can be exchanged (that is, the network is not a problem);

[4] The number of the controlled AP is not more than 5, exceeding the quantity cannot be found;

If you still can't find it, try resetting the AP and upgrading the software.