How to set the Tp-link wr802n relay mode
The so-called relay mode, generally refers to the wireless signal (the main wireless router), and the extension of the signal to a larger range (covering the weak part of the signal), usually set up in the weak signal at the multiple rooms, connect the wireless signal.
2 First look at the back of the router nameplate, moji the name of the router is: tp-link_60b13c
3 because it is a relay mode (REAPTE), the power of the micro-router is switched on without the need to plug the network cable.
4 You need to confirm the wireless username and password for the front-end router (the following settings will be used).
5 first turn on the computer to find the front end of the wireless signal (tp-link_60b13c) → connection.
In the browser's address bar input: 192.168.1.253, and then enter the login password and Confirm password (consistent)
Go to the setup Wizard → next.
Click Reapter (relay mode) → next.
Click on the scan to find the signal for the front-end wireless router.
Locate the wireless signal that the front end needs to relay and click Connect.
Input and front-end wireless consistent wireless password → next step.
Setup is successful, click Reboot to take effect.
Click on the lower right corner of the wireless network icon → find the signal source → connection.
Input and front-end wireless consistent password → OK.
The connection is successful, the system pops up select the network nature of the menu, click the Home network, even if finished.