How to set up the computer power-on password?

In the computer's BIOS setup interface, set the boot password, the computer can protect the security of a very good protective effect. The following XP system home describes how to set the BIOS power-on password.

1, press the DELETE key after the boot, enter the BIOS setup interface, as shown in Figure 1.

Figure 1 BIOS Setup Interface

2. Select the Security tab and display the settings in the Security tab, as shown in Figure 2.

Note: In a desktop computer, the user presses the DELETE key to enter the BIOS setup interface; In a notebook computer, the user needs to press F2 key to enter the BIOS setup interface.

Figure 2 shows the settings

3, press Enter health confirmation, pop-up the corresponding text box, enter the password, as shown in Figure 3.

Figure 3 Entering a password

4, press ENTER to confirm, pop-up text box, enter the password again, as shown in Figure 4. Press F10 to save the exit and restart the XP system to complete the BIOS power-on password setting.

Figure 4 Entering a password

Users can, according to the above methods, try to set the corresponding password in the BIOS, do a good job of computer protection.