How to set up the Tenda router

The first is the installation and commissioning of hardware equipment connection, first of all to ensure that their access to the network unimpeded OH

The WAN port connects the broadband to the incoming line, the LAN port connects the computer inside the local area network, very simple is not.

Now we log on to the router to set up

Right-click on "My Network Places"--"Properties"

Enter properties for local Area Connection

To debug by selecting Properties for Internet Protocol TCP/IP

If it is a new router, click Select "Automatically obtain IP address" and "Automatically obtain DNS server address". The bottom of the router also has related network segment information.

You can also set up a manual IP address, but make sure that a network segment of the router

Now log on to the router. Open the browser and enter the router's default IP address (192.168.0.1 in the picture)

In the pop-up login window, enter Username: admin Password: admin; then click OK. (Other routers can obtain the default password from the instruction or the bottom)

Browser into the administrator mode of the main page, through the wizard to set up the router to dial.

Set up the wireless connection, too.

Enable Wireless features: "Check" after the wireless enabled, if you do not want to use wireless, you can deselect, all wireless-related features will be prohibited;

Network mode: Select one of the modes according to the wireless client type. (usually choose the default blending mode if you don't know)

SSID: Service collection identifier, network name of wireless signal, modifiable, SSID is required.

Broadcast (SSID): Select "Off" to prohibit the router from broadcasting the SSID, and the wireless client will not be able to scan to the router's SSID. When you select Close, the client must know the router's SSID to communicate with the router, and the default is on.

Channel: The channel currently used by the router, from the Drop-down list, you can choose another valid working channel, which can be selected between 1-13.

Wireless security settings also need to be set up to avoid security issues.

Click on the left wireless setting-Wireless security settings (pictured below). Describes the three most commonly used encryption methods, including MIXEDWEP encryption, wpa-individuals, wpa2-individuals, and so on.

Select SSID: Select the SSID you want to set, and secure encryption settings for both the primary SSID and the secondary SSID, respectively.

Safe Mode: You can select the appropriate security encryption mode from the list, this router supports MIXEDWEP encryption, wpa-individuals, wpa2-individuals. Generally we recommend the choice of wpa2-individuals can effectively prevent from being rubbed against the network to crack the password.

WPA encryption rules: There are TKIP, AES, Tkip&aes. AES is recommended for use.

Key: Please enter the encrypted string you want to use and the valid characters are ASCII characters. The length is 8 to 63.

If you are unfamiliar with the advanced settings, you can leave the default values

BG Protection mode: facilitates slower 11b/g wireless clients to connect to 11n wireless networks in complex and multiple modes, by default, "Automatic".

Basic Data rate: Adjust the wireless basic transmission rate according to actual needs. The default value is 1-2-5.5-11mbps. It is recommended that you do not change the default values.

Beacon interval: Set the AP send Beacon packet frequency, generally speaking, the smaller the time, the faster the wireless client access, the more time settings, to help wireless network data transmission efficiency, the default value of 100, we recommend that you do not change the default value.

Fragment threshold: Set a fragment threshold, once the wireless packets exceed this threshold to divide it into fragments, fragment size and fragmentation threshold, the default value is 2346, it is recommended not to change the default value.

RTS Threshold: RTS (Requesttosend), when the packet size exceeds this threshold value, use the cts/rts mechanism to reduce the likelihood of conflict. In the presence of interference with long-distance client access, you can set a relatively small RTS value, in general Soho Office site is not recommended to change the default value, or it will affect AP performance.

TX Power: This is used to set the wireless transmit power level. The default value is 100.

Wmm-capable: Can improve wireless multimedia data transmission performance (such as: video or online playback), if you are not familiar with WMM, please set it to open.

Aspdcapable: Automatic power saving mode, the default is off.

How to set up the Tenda router now you know what you're doing? The download bar is recommended that you can follow the step-by-step test operation, I believe it will not be very difficult, if the error, reset the router resets.