tp-link wr800n Wireless Router Setup method
The Tp-link wr800n wireless router is connected to the power supply and the notebook is wirelessly connected to the wireless signal of the router;
Open the browser and enter tplogin.cn in the address bar;
Enter the password to log on to the router in the window that appears requiring the password to be entered;
And to confirm, you can enter the configuration page;
On the left side of the configuration page, select "System Tools"-"Working mode" to check "allow to switch mode of operation in software Control", and select "No Line by mode", click "Save";
In the Restart Confirmation dialog box that appears, click OK;
Reboot the router;
On the left side of the configuration page, select network Parameters-LAN port settings, modify the router's configuration address to the address you want, and restart the router
When you log in to the router's configuration address again, enter the router management password that you set up before and log on to the configuration page.
Next, the wireless SSID and password are set,
On the left, select wireless Settings-Wireless security settings, and wireless security settings in the Settings window on the right;
After setting up the wireless password, the notebook needs to reconnect the wireless signal of the router;
You need to enter a wireless password at this time;
Access to the Router configuration page, at this time the router networking mode can be set up;
Select "Network Parameters"-"WAN settings" on the left, and choose the networking mode according to the actual situation.
Dynamic IP: Through the dynamic access to the network of addresses to do networking;
Static IP: Through the configuration of static can be out of the network of addresses to network;
PPPOE: Networking By configuring information provided by network operators.