How to set up the TP-LINKWR842N wireless router

tp-linkwr842n Setup Tutorial

The first step, the correct installation of Tp-link tl-wr842n wireless router

In the case where the Tp-link tl-wr842n wireless router is powered on, use a network cable to connect any LAN (1/2/3/4) interface on the router to the computer, with another network cable connected to the ADSL Modem (cat) or the fiber-optic cat and the router WAN. If everyone's broadband access is directly in the household network cable, then such a network cable directly with the router's WAN port connection. After the installation is successful, the SYS indicator on the device flashes, the WAN interface is often lit or blinking, and the port that is connected to the computer in the 1/2/3/4 mouth is often lit or blinking.

Note the problem:

(1), ADSL Modem (CAT), fiber-optic cat and household network cable is the current domestic broadband access to three ways, everyone according to their own access to choose one.

(2), in accordance with the above way to connect Tp-link tl-wr842n wireless router, the computer temporarily can not access the Internet; when Tp-link tl-wr842n wireless router is set up successfully, the computer can automatically access the Internet.

(3) Make sure that the network cable used to connect the computer-router, router-cat (light cat) is normal to use, and if there is a problem with the network cable, it may cause you to not be able to log on to the Tp-link tl-wr842n wireless router's setup interface, or to set up the Internet.

Step two, set the computer IP address (automatically obtain IP address)

Before setting up the Tp-link tl-wr842n wireless router, you need to set the IP address of the computer to be automatically obtained, as shown in the following figure; In general, computer IP address is automatically obtained by default, but for the sake of insurance, we recommend that you check the settings; If you don't know how to set it, You can refer to the tutorial:>> computer automatic access to IP address setting method

Step three, Tp-link tl-wr842n wireless router Internet settings

1, open the Computer browser, in the browser address bar input tploing.cn, press ENTER, enter the Tp-link tl-wr842n wireless router login password Settings window.

2, after the "Set password" box for the Tp-link tl-wr842n wireless router set the login password, in the "Confirm password" in the password again, click "Confirm". (Note: The Tp-link tl-wr842n wireless router with tploing.cn as the login address has no default username and default password)