How to set up the tplink300m wireless router

tplink300m Wireless Router Setup method

Step one: Configure IE browser

1, run IE browser, click the "Tools"--> Select "Internet Options."

2. Select "Connect"--> to remove dial-up connections in the dial-up and virtual private network settings option--> select LAN Settings.

3, check "Automatic Detection Settings"--> "OK".

Step Two: Router installation

1, telephone line users: Please prepare 2 short network cable, a network cable used to connect ADSL modem or light cat on the network cable interface and Tp-link tl-wr842n router on the WAN interface; another network cable, one connection to the computer, the other end of the connection Tp-link 1/2/3 any interface on the tl-wr842n router.

2, Optical brazing users: users need to prepare 2 network cable, one of the network cable used to connect the light cat and Tp-link tl-wr842n Router WAN interface, another network cable to connect the computer and Tp-link tl-wr842n Router LAN interface (1/2/3/ Any one of the 4 is OK).

3. NET Network: Please prepare 1 short network cable, network cable households: refers to the broadband operators to provide a network cable to the user's home; Please first plug the network cable provided by the broadband operator into the WAN interface on the Tp-link tl-wr842n router, and then connect the prepared network cable to the computer, The other end connects the 1/2/3 arbitrary interface on the Tp-link tl-wr842n router.

Note The problem: The LAN status indicator for the LAN port on the router panel and the network card LEDs on the computer must be lit.

Step three: Set up the computer IP

When connecting the tl-wr842n router to the Internet, you need to configure the IP address of the computer to be a dynamic IP address (automatically acquired); Because the router has DHCP service enabled, you can assign computers the IP, gateway, subnet mask, DNS, and other addresses needed to access the Internet. Detailed configuration method Please read: Computer dynamic IP address configuration method.

Step four: Set up the tl-wr842n router

1, Login Management interface: Open the Web browser, in the browser's address bar input: tplogin.cn and press ENTER--> set the administrator's login password--> click "Confirm". (Please keep in mind that you set up the administrator login password, once forgotten login password, only by restoring the factory settings to reconfigure)

Attention to the problem: set the management password, if the user logged on 10 consecutive administrator password error, then within 2 hours can not log into the router management interface.

2, Run the Setup wizard: the first time you log in to the TL-WR842N router's management interface, the system will automatically run the Setup Wizard, if it does not eject the page, you can click on the left side of the Page Settings Wizard menu to activate it.

3, choose the way of Surfing the Internet: select "PPPoE (ADSL virtual dialing)"--> "Next".

4, configure the Internet account: Please according to the ISP broadband operators to provide broadband username and password, fill in the "Internet account", "Internet password"--> "Next".

5, wireless network settings: Set the "SSID", the SSID is the name of the wireless network, attention can not use the Chinese--> select "Wpa-psk/wpa2-psk"--> set "PSK password"--> "Next".

6, click "Finish"

At this point, the completion of the Tp-link tl-wr842n 300M wireless router installation and Internet settings, connected to the TL-WR842N router computer directly to the Internet, the computer does not need to dial; another smartphone, Wireless terminals such as tablet computers can also connect to the TL-WR842N router's wireless network to access the Internet.