Set up the TL-WR842N router virtual server step One: Set the computer IP address
For example, a small company, using Tp-link tl-wr842n router access to the Internet, the company's local area network architecture of a mail server, a Web page server.
Users on the Internet are normally not able to access mail servers and Web page servers directly on the local area network, but you can set up a virtual server (port forwarding) on the tl-wr842n router to implement it.
Before you set up port forwarding, you need to follow the above requirements analysis of the information, the LAN mail server, Web page server IP address, manually set to 192.168.1.100, 192.168.1.101. The following figure shows:.
set up a tl-wr842n router virtual server step two: Set up a virtual server
1, in the tl-wdr6300 router settings interface, click the "Forwarding Rules"--> "virtual Server"--> and then click "Add New Entries"
2. Add mail Server rules
(1), send mail port mapping rules: "External Port good" fill:25--> "Internal port number" fill:25--> "IP address" fill:192.168.1.100--> "Save"
(2), receive mail port mapping rules: "External Port good" fill:110--> "Internal port number" fill:110--> "IP address" fill:192.168.1.100--> "Save"
3. Add Web Server rules
"External Port good" fill in:8080--> "Internal port number" fill:80--> "IP address" fill:192.168.1.101--> "Save"
4, check whether the rule is effective: Click the "Forwarding Rules"--> "virtual Server" to see just added the rule status.
set up the TL-WR842N router virtual server step Three, verify the virtual server settings
Clients on the Internet access 121.202.33.100 through the mail client software to access the mail server. The Web server is accessed through the browser in the following form:
Pay attention to the problem
1, the specific form of access to the actual server requirements prevail.
2. If your broadband is not a static IP address, you can apply for the domain name account in "Dynamic DNS" and log in to the router
Account, login to use your domain name and open port number to access the server.