How to set up wireless network of telecom fiber Cat

How to set up wireless network of telecom fiber Cat

Telecommunications home broadband basic solid fiber cover, with fiber-optic cat also has a wireless function, greatly facilitate the use of users, then the wireless network how to set up, please follow the following operation.

1, telecommunications fiber-optic cat installed, please connect the network cable port to a network of fiber cat (such as network Port 1).

2, the other end of the network access to the computer network port, to view the status of Internet links to ensure successful access to the network.

3, use the default address into the fiber-optic Cat Settings page, the general default address is 192.168.1.1, user name and password can be found behind the device.

4, set up wireless basic information:

After successful landing, click on the "Network" column, the left default in the WLAN basic configuration, confirm "Enable wireless", "Wireless QoS", "Wireless multicast" before all tick. You can modify the SSID of the wireless network in this page, which is the name of the wireless network, as shown in figure:

5, set the wireless network password:

In the left navigation bar, select WLAN Security Configuration and configure the following:

Encryption method: Mixed WPA2/WPA-PSK

Modify Password: WPA and shared secret key in the column modify the wireless network link password

Click Save/Apply

6, after the establishment of success, can be with the revocation network cable, through the wireless internet link.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join