ICOM A2 Wifi a2+b+c 2014.4V Engineers Version is a professional and best diagnostic and programming OBD2 scanner for BMW. Recently, many fellows called me for Super BWM ICOM A2 USB WIFI setting problem. Here is some successful tips for sharing.
1.Insert USB WiFi to the USB port on your computer;
2. Turn off the build-in WiFi on the computer or make the additional wifi not work; That's, your USB WiFi of your equipment is the only Wi-Fi on your computer. Don ' t connect the wired Internet access to the Internet and equipment cable.
3. Press the button to make your computer start after you is sure that and all is about Step 2.
4. Make sure, the network is turned off and cannot are connected to network cables.
This DWA-131 is your usb-wifi. It cannot be turned off. It's normal to show the Mark's a Red Cross.
5. The software starts and choose WIFI for ICOM.
6. Connect Icom A2 to your vehicle and you'll see that the lights of Wi-Fi do not flash or flash slowly after waiting for 20-60s.
It means that both USB WiFi and icom A2 WiFi is OK.
7. Now you can click Diagnosis or programming software.
This prompt information is OK
8. Minimize the interface for it isn't allowed to be closed.
9. The equipment can be recognized normally.
How to solve BWM ICOM A2 USB WIFI setting problem