Solution to Linux Network Problems 1. check/etc/sysconfig/network-script/to check whether eth0 and eth1 are correctly configured. view/etc/modual. check whether the configuration module of conf is correct. 3. restart and run the/etc/init command. d/network restart -------------------- or not ----------------------- 1. ping yourself. If yes, the NIC drive is normal. 2. ping gateway --- no connection, indicating that the NIC parameter settings are incorrect. 3. if you use miI-tool eth1, the network card is M. 100basetx-fd means that the 100 m full duplex Nic works in m full duplex adaptive mode. 4. therefore, ethtool eth1 is used to view eth1 information. after compilation, the NIC driver will compile rhinefet. o file. This is the driver module. We copy it to the corresponding place --- No 6. this problem is caused by r8169. Our driver should be r8168 .-------
Transferred from: www.112.name
