How to solve the defects in the operation of fan motor

If there are some defects in the use of the motor will have a great impact on the use of the fan, to ensure that the normal use of fan motor is to guarantee the most basic ventilation effect requirements, but many users of the motor is not enough attention, resulting in a lot of motor problems, even the motor is facing the situation of abandonment, In order to reduce the cost of wind turbine users of the economic costs, in fact, the various components of the fan is necessary to carry out maintenance, this is very important, although the fan (http://www.mmfj.com/news/detail-338512.html) Maintenance and can not fundamentally completely eliminate the emergence of wind turbine failures, but also can play a great help, today, small series summed up a number of fan motor related common problems, I hope to be able to help users of the fan.

In the operation of the fan, the balance of the motor is relatively large, which is a common problem, and the fan often in high-speed, low-load operating conditions, fan vibration, the site noise is very strong, the working environment is very bad. When the bezel is adjusted to less than 10%, due to excessive negative pressure, it will cause the pipeline to surge, endangering the safety of equipment operation. In any environment, personal safety and equipment safety are the most important.

The possibilities moment output of the fan is large, under the condition of the power grid capacity in the factory, the starting current of the motor is very high at the direct start, which may cause the high voltage power supply into the line protection action, the motor cannot be started continuously. This requires the user to fully pay attention to the power supply current and rated voltage when starting the motor, so as to allow the motor to start in the normal environment.

The power loss of the blower is serious, and the power consumption of the motor starts at the time of normal operation. During normal operation, the baffle opening is especially under 50%, the wind pressure on both sides of the baffle is large, and the loss of throttle and wind pressure is great. This is really complex to solve, requiring users to master some of the specialized power knowledge.

These problems, although not every user of the fan will appear, but many problems are often caused by the user in the use of neglect, so regardless of the user's fan has not arisen above the problem, in the use of the fan motor to carry out the necessary maintenance, this also can ensure the ventilation effect.

How to solve the defects in the operation of fan motor