How to solve the BIOS interface when installing Win7 flagship system

One, the Win7 system cannot enter the BIOS to set the interface The reason analysis

1, it is possible that they do not understand their own motherboard brand, the Start button pressed wrong;

2, boot time memory detection for a long time;

Second, the resolution steps

1, the most important thing is to understand the main board of what is the brand, you can refer to the following two map to correctly enter the BIOS interface.

(1) in the power-on when the specific startup key can enter the BIOS setup program, different types of machines into the BIOS setup program startup key, several common BIOS Setup program entry mode as shown in Figure 1

(2) U disk boot allows us to do not use other disk media, so that the U disk for the temporary start, different brands of computer motherboards BIOS to start the fast method is also different, several different brands commonly used to start hotkeys as shown below;

2, memory detection is the computer must start the process.

If the "Quick Power On Self Test" item is not set to "Enable" in the BIOS setup so that the memory will be checked 3 times, set this option to "Disable" and then press F10 to save the exit.