How to solve the notebook computer monitor keep flashing

Source: Internet
Author: User

In our life, the notebook computer to open the machine, the most is to protect the keyboard, do not let the water into the inside, or the fan clear gray what. The following small series on the introduction of seven kinds of computer monitors flashing problems and solutions.

  First, the display refresh rate is not set correctly

If the refresh rate setting is too low, it will cause the screen to wobble, check the blank area of the system desktop with the right mouse button, click the Properties command from the pop-up right-click menu, and go to the Properties Settings window of the monitor. Click the Settings tab in the window, and then click the Advanced button in the corresponding depth Win7 System tab page, open the Advanced Properties settings interface for the monitor, and click the Monitor tab, where you can see the display refresh rate set to "60". This is why the monitor screen is constantly shaking.

Set the new frequency to "75" and then click OK to return to the desktop. In fact, monitor screen jitter is the main reason is the display of the refresh rate is less than 75Hz, at this time the screen will often appear jitter, flashing phenomenon, we simply adjust the refresh rate to more than 75Hz, then the screen jitter phenomenon will not appear again.

  Second, the graphics card driver is not correct

Sometimes when we go into the computer's monitor refresh rate, we find that there is no refresh rate to choose from, because the driver of the previous video card is incorrect or too old. It's easy to get this problem on a computer that has an earlier purchase time at this point do not use the purchase of the computer with the CD-ROM driver, you can download the corresponding display card of the latest version of the driver, and then open the "System" Properties window, click the "Hardware" window of the Device Manager button to enter the system's device list interface. Right-click the display card option in the interface, click Properties from the pop-up right-click menu, and then click the Driver tab in the Card Properties Settings window that appears in Dan, and then click the Update Driver button in the corresponding tab page. After the wizard prompts Step-by-step to update the graphics driver to the latest version, and finally the computer system restarted a bit, if the driver installation is appropriate, the display will appear refresh frequency options, and then set the refresh rate to more than 75Hz.

  Third, the magnetic field interference caused the display jitter

Monitors are susceptible to strong or strong magnetic fields, and if the two methods described above still do not resolve the jitter problem, it should be suspected that the screen jitter is caused by a magnetic field or an electric field near the monitor. In order to remove all interference from the perimeter of the monitor, you can move the computer to a table around the empty, and then the power-on test, if the phenomenon of screen jitter disappears, then your computer where the original place has a strong electric field or strong magnetic field interference, please suspicious things (such as speakers of the subwoofer, magnetized cups, etc.) From the computer near the good. Then turn off the monitor and reopen it a few times to achieve the purpose of degaussing (the current display has an automatic degaussing function when it is turned on).

  Four, the display card contact bad

Open the chassis and pull the display card out of the slot. Then hand will show Kakin fingers of dust wiped clean, it is best to find soft hair brush, gently the graphics card surface of the dust all clear clean, and then use a clean eraser on the surface of the gold finger wiped a few, to clear the gold finger surface of the oxide layer, Finally, reseat the display card tightly into the motherboard slot and fasten it to the chassis shell with screws. Then the boot test, the general failure can be resolved.

  Five, monitor aging

Sometimes because of the use of the display age has been high, will also appear dynamic phenomenon. In order to verify the aging of the electronic components inside the display, the faulty monitor can be connected to someone else's computer for testing, if the fault still disappears, the monitor is bad and needs to be repaired.

  Low-quality power supply or power equipment has been aging

Many of the computer power use of the components of the work, materials are very poor, easy to cause Ghost XP system computer circuit is not smooth or power supply ability to keep up, when the system is busy, the monitor will appear in particular the phenomenon of screen jitter. When the computer's power device starts to age, it is also easy to create the same problem. The power supply can be replaced for testing at this time.

  Seven, the virus mischief

Some computer viruses will disturb the screen display, such as: character inversion, screen jitter, graphics flip display. Screen jitter scripts that are ubiquitous on the web.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.