How to solve Tp-link tl-wdr5600 can't use 5G network

Solution Tp-link tl-wdr5600 cannot use 5G network method one, router on 5G wireless network setup Improper

1, check whether the 5G wireless network has been enabled

In the tl-wdr5600 router Setup interface, click on the "Common settings"--> "Wireless Settings"--> and then look at the "5G Wireless status" option to enable, as shown in the following figure. If it is turned off, turn on the 5G wireless network again.

Open the tl-wdr5600 5G wireless network

2, 5G wireless network Name setup problem

Wireless network name, it is recommended that you should use letters, numbers to set up, do not use Chinese characters. Because some mobile phones, flat-panel wireless network card does not support Chinese, or the Chinese support is not friendly, will cause the search does not have the Chinese WiFi name, or connect Chinese wifi after the network instability.

So, friends who like to set WiFi names in Chinese, suggest that you change the WiFi name to a letter or a digital type to ensure the availability and stability of your wireless network.

The tl-wdr5600 5G wireless network name cannot be Chinese

3, check whether the 5G wireless network to open the wireless broadcast

Whether it's a 2.4G wireless network or a 5G wireless network, wireless devices, such as mobile phones, laptops, tablets, and so on, are only able to search for the WiFi signal when wireless broadcasts are turned on.

So, if you can't search the WiFi signal on the tl-wdr5600 router, you can check to see if the 5G wireless network on the TL-WDR5600 router has wireless broadcast enabled. You can view this in the following way:

Click the "Advanced Settings"--> "Wireless Settings 5G"--> "Host network"--> check whether the "open wireless broadcast", if not checked, please check the selection again. As shown in the following figure

TL-WDR5600 's 5G wireless network opens the Wireless broadcast function

Workaround Tp-link tl-wdr5600 cannot use 5G network two, wireless client does not support 5G wireless network

To use the 5G wireless network on the tl-wdr5600 router, wireless devices such as mobile phones, laptops, tablet computers, and wireless network signals from the 5G band are required to search for 5G wireless network signals on the tl-wdr5600 router.

If wireless devices, such as mobile phones and laptops, do not support 5G wireless networks, there is a problem of not finding 5G wireless network signals. Therefore, please check and confirm your own wireless device and whether it supports 5G wireless network.

Pay attention to the problem

The Tp-link tl-wdr5600 router has V1.0 and V2.0 two versions, and these two versions of the tl-wdr5600 router have different setup interfaces. This article uses the V1.0 version of the tl-wdr5600 router as an example to introduce the demo. If you are using the V2.0 version of the tl-wdr5600 router, refer to the contents of this article to check the 5GWiFi name settings, whether to turn on wireless broadcasts, and whether to enable 5G wireless networks.