How to summarize the case of the chassis walking back wire? DIY Assembly computer chassis walk back line skills

The back line is in recent years in DIY assembly computer, more often heard, belong to the DIYer of professional terminology. In simple terms, the back line is for the computer chassis, as long as the chassis and power support to go back line, in the installed time, it can be internal wire to achieve the most streamlined and tidy, not only beautiful appearance, late maintenance is also convenient, and also conducive to chassis cooling.

　　How to summarize DIY assembling computer case walk back line skill by chassis walking back wire

Now some slightly better chassis and power supply are supporting the back line, but the back line due to the internal decoration of the chassis, if you can do the most concise, but also need to think about, in simple terms, is the need for some skills.

Reasonable chassis walk back line interior scene (simple and comfortable)

Today, the computer Pepsi Net small make up for you to share the DIY assembly computer chassis walk back line skills, pure experience, DIYer may wish to learn.

In fact, the chassis to go back line is like to decorate some of the house, CPU, motherboard, graphics, hard disk and other hardware is equivalent to furniture, when the installation is finished, the last is to go back line link, if the wire is very messy, the final internal effect is difficult to be satisfied.

Do not support the back line chassis internal scene (obsessive-compulsive disorder, you suffer?)

And a lot of DIY installed players in the chassis to walk the line, have not to think how to streamline the perfect, how to classify the internal wire bundle, but simply to connect the wire, completely regardless of whether it is beautiful, the final line out of the effect of natural is passable.

Chassis go back line is actually skilled, in the line before, we should think about, which wire can be categorized bundled together, how to go line, and so on, these need not only the DIY hardware wiring connection has connected, but also need to move the brain, looking for some laws.

　　1, first of all talk about chassis fan line tips

Today many of the mainstream DIY computer chassis will be equipped with fans, mainly to strengthen the internal cooling. And the chassis fan line, the main need to think about how the fan to connect the power supply and how the wire line these two issues.

General fan power lines are relatively short, using 4Pin interface or D port to connect. If the motherboard can be located near the fan interface, installed in the front panel, such as the use of the power of the D port to provide power.

Chassis fan walk back line tips

If there are more fans in the chassis, motherboard interface is not enough or appear cluttered, you can use 2-in-1 line collection. CPU Heatsink Fan Wire installation will have a certain amount of redundancy, can be installed in the base before the winding, as far as possible to be elegant.

The chassis fan's walking line can be thought of as the nearest principle, if there are more than one cooling fan, you can consider using 2-in-1 line collection. In general, the chassis fan line is not difficult, as long as the master of the nearest or inductive combination of 2 principles can be.

　　2, the motherboard jumper to go back line skills

We know that the switch keys, Power LED, hard drive LEDs, and USB and audio connectors are located in front of the chassis, and these wires must be connected to the motherboard. Because of the more complex wire, and the main board connection is through the motherboard's pins, installation is more trivial, wire collection is not easy to handle.

Chassis attached to the motherboard a lot of jumpers, these wires need to connect the motherboard

The wire on the front panel looks more cluttered than the power supply wire. But for easy operation, all wires need to be connected to the motherboard. After understanding the definition of each stitch, it is also necessary to carefully insert the wire into the motherboard.

The meaning of each jumper inside the chassis

The pin design of the motherboard is different depending on the brand and model. But there will be marked on the pins, corresponding to the definition of wire, one installation connection can be.

Motherboard Jumper Interface Location

USB Interface Location

Multiple jumpers can be wrapped together with the power cord, visually appear not messy. From installation to finishing is actually very simple.

Chassis jumper Line can be bundled together.

Fixing tips for chassis jumpers

The connection to the motherboard jumper may feel difficult for many friends who first assembled the computer, let alone the back line. But in fact, as long as the logo on the motherboard and wire interface on the logo, the connection is not difficult, the idea is to go back line of these wires together into a wire, so much simpler.

　　3, the power to go back line skills

Refer to the chassis to go back line, many friends think the most should still be the power to go back line. Because most hardware, such as motherboards, CPUs, video cards, hard disks, cooling fans, and so on, must be powered by the power supply, these hardware need to be connected. The basis of the power-back line is two points: first, whether the chassis design support; second, whether the power supply wire length is satisfied, most of the current power supply and chassis support to go back line, in the purchase of related products, pay attention to choose some brand reliable products, some low-cost products may have cut corners, affecting the back line.

Schematic diagram of the power supply off the back line

Power supply chassis Go back line is not difficult, the main reasonable use of the chassis to go through the hole, and then the power cord classification bundle, the nearest through the need to connect the hardware can be, as shown in the following figure.

Too much wire, but also affect the alignment, but fortunately placed inside the chassis, also does not affect the final positive interior of the aesthetic

For many players, more hardware installed in the chassis, natural wire will be a lot. If too lazy back line or is really unable to get out of the back line, can be the wire collection in the backplane and other places is also good. The inside of the chassis can not see the messy wire, will not affect the heat dissipation, and to the chassis backplane will not be exposed, does not affect the overall aesthetic degree.

Wire less, enough to better do the perfect walk back line

As long as the power supply wire length sufficient, the chassis has back line design, ordinary players can also get out of the neat back line. The original intention of the back line is to clean the chassis space, to avoid too much wire influence aesthetics and heat dissipation. Then the back line does not need to force out too neat appearance.

　　4, chassis walk back line appreciation

The end of the article for you to share some of the more classic chassis walk back line example, in the future, we will take the chassis to go back line, you can also use the appropriate reference to imitate some.

Perfect chassis walk back line visual effect

The last small series for everyone to list the advantages of the chassis go back line, together to understand the next bar.

So that the internal space of the computer chassis larger and more open, better ventilation, to maintain a complete chassis of the air duct, is conducive to heat dissipation;

Easy to clean the dust

Some do not support the back line of the computer, the internal wiring of the chassis is often messy, in cleaning up the computer dust, a bit of an inconvenience, not conducive to dust cleaning, and after the line, the inside of the chassis neat, there is no obvious line and cross line, dust more convenient to clean;

Motherboard surface without Open-wire cover, the inside of the chassis looks more refreshing, more beautiful;

DIY Assembly computer chassis to go back line skills for everyone to share here, I hope that the vast number of DIYer enthusiasts friends help. In fact, the chassis walk back line is not difficult, as long as the chassis and power support, and is willing to study thinking, reasonable bundle classification wire, you will be able to get out of the more perfect chassis back line.