Preparation Work :
Download putty Telnet software with the following icon
Open the Linux host.
Linux Host Readiness Conditions:
1 Configure the IP, if you use the virtual machine is recommended by VM1 or VM8 to connect with the local real machine, while the attention to avoid the network with the Gateway IP conflict (many local area networks use private address 192.168.1.1, so when configuring the virtual machine IP to avoid setting the IP address). While not using bridge connections, you can avoid affecting the host's normal Internet connection (connecting to an external network).
The procedure is as follows:
2 Turn off the firewall or turn on port 22nd
3 Open SSH Service
If you do not have an SSH package installed, please open the SSH service after installation
4 Configuring the IP address of the local real machine
5 Verify the connectivity of native and Linux virtual machines by natively
6 telnet to a Linux virtual host via putty
How to Telnet and control the Linux platform via Putty Software