How to turn a U disk into a system installation disk

The following is the specific method of production, the total need to enter 10 lines in the CMD code, please strictly follow the following process operation:

First step:

Plug the U disk into the computer. Take the WIN10 system as an example, click the Natalie icon to enter "CMD", and then run the command prompt program as an administrator.

Step Two:

Enter "DiskPart" (without quotes) after the default > symbol, and then enter, and the prompt diskpart> the representative successfully enters the DiskPart tool, and subsequent commands operate at that prompt.

Step Three:

Type "List disk" after diskpart>, and then enter. The command is to let us know how many hard disks and USB drives are installed in the computer, and where they correspond to the position of the letter. For example, small knitting computer has 2 hard drives, and U disk is the corresponding disks 2.

Fourth Step:

Enter "Select Disk 2" and return. The purpose of this operation is to enter the disk 2, which is inserted in the computer on the U disk. If your computer has only 1 hard drives, plug in a U disk, the USB stick should be 1. In short, this number must be the same as the previous command results, if the wrong hard drive, the next will be inside the data empty Oh.

Fifth Step:

Follow these commands sequentially.

"Clean" to remove the contents of the U disk;

"Create partition primary", creating the primary partition;

"Select partition 1", select the first partition;

"Active" to activate the partition;

"Format Fs=fat32 Quick" to FAT32 quickly format the partition;

"Assign", assigning drivers;

"Exit", exit the DiskPart tool.

Sixth step:

Unzip the downloaded ISO system image file and copy it all to the USB drive. If the U disk icon becomes the system installation disk picture on behalf of the Production Guide U disk success!

Now you can plug in any computer on the U disk, and use the U disk to start the normal installation of the system!