How to use a network cable to achieve the two computer file sharing
One, in the local area network, if two computers are plugged in a network cable, you can realize the sharing of files under the LAN, the specific method is as follows:1, use the computer to share files to open cmd, enter Ipcofig to view the other computer's IP address, I have another computer IP for 192.168.1.1022, find the folder to be shared, right-click the file, tap Share, select Share to everyone, as shown in
3. Open Run (win+r), enter two backslashes and IP address as shown below
4, click OK will prompt to enter the other user name and password information ( Note that the other computer must set a power-on password, otherwise it will always prompt for the correct password ), enter the user name and password, such as
5, click OK, will enter the shared page, if you do not see the refresh will see the shared files, as shown in
In the shared folder can be arbitrarily copied files, if the network cable quality is good, should theoretically close to the speed of the hard disk, I here 15m/s around, the speed is quite to force!
Second, in the absence of a network, directly with a network cable inserted into two computers can be achieved file sharing
When two computers connected to a twisted pair, the system will automatically generate a temporary IP address, also in cmd input ipconfig to query, such as, my Computer generated IP is 169.254.186.101
In the shared file on the computer to enter the command query IP (another computer IP is 169.254.35.159), the basic steps above, enter the user name and password to achieve the two computer file sharing, the results are as follows:
Note: Shared files must be set on the computer password, or sharing failed!
At this point, we can use a network cable to achieve the sharing of files between the two computers, no need for networks and USB flash drive can also be quickly copy files!
How to use a network cable to achieve file sharing between two computers