How to use a vro to limit others' network speeds

Each dormitory in the school uses a line to access the Internet. If someone is downloading it, the network speed becomes slow, and others will be stuck playing games. Is there any way to limit the network speed of others, to limit the download speed. Of course, this is acceptable. Next I will teach you how to limit others' network speeds to limit others' download speeds.

Of course, the method described in this article to limit others' network speeds is implemented through routers. If your vro does not have a speed limit function, or you think it is troublesome to limit the lan network speed through a vro and control others' network speeds, you can also use the Special LAN speed limiting software-"jusheng network management" (: http://www.grablan.com/soft.html), after installing a computer in the LAN, you can view the network speed of all the computers in the LAN in real time, you can restrict the speed of each computer on the LAN at any time, and prohibit P2P downloads on the LAN (especially when downloading thunder is completely restricted ), prevents P2P software, network videos, and other network speed and bandwidth snatching behaviors, and protects the LAN from fair access.

1. Enter the correct account password

Many vrouters now have built-in wireless bandwidth control functions. TP-link and even vrouters of less than 100 have these functions. First, enter the IP address of the wireless router in the address bar of the browser. The default IP address is 192.168.1.1. Then, enter the user name and password of the router to log on to the router. The default account and password are included in the manual, many vrouters use the default account and password.

 

2. Enable IP bandwidth control 

Find the IP bandwidth control function in the vro settings menu. In the example of a TP wireless router, you must check "enable IP bandwidth control" to make it effective. Some wireless routers need to restart the router to take effect after IP control is enabled. Please carefully fill in the bandwidth type and maximum bandwidth, otherwise it will be easy to "speed up", that is, 4 M bandwidth may reach 2 m.

 

3. Select different IP Control Rules

Select an IP control mode, such as limiting the maximum bandwidth and retaining the minimum bandwidth. You can set it to "limiting the maximum bandwidth" to limit the network speed and download speed. You can set it to "retain the minimum bandwidth" to ensure basic requirements such as Browsing webpages.

 

4. Set a fixed IP address for all computers 

In the IP address segment, enter the IP address of the computer you want to control. Enter the IP address segment here, that is, enter an IP address range. If there is only one computer, set the starting IP address to the same. We recommend that you set a fixed IP address for all computers in the network, or assign a relatively fixed IP address to the vro Based on the MAC address.

 

5. Use the vro network isolation Function 

To prevent computer viruses, or prevent other users from using software such as P2P Terminator, if the router has the anti-ARP function, enable it. A vro that is relatively expensive has the network isolation function. If yes, you can set the computer to a different VLAN for convenient management. At the same time, we recommend that you use the firmware with the built-in bandwidth control script if the vro can be used for tomato refreshing.

 

If a wireless router is old and cannot use bandwidth control or QOS to limit the speed of others' network, the download speed can only be limited by magic shield.